Sony KV-27V42 27" TV Logo

Related Topics:

Question about Sony KV-27V42 27" TV

1 Answer

Sony kv27-42 4 blinks i replace ic541. stall the dead. it try to come on but you hear 3clicks and then go to 4 blinks i have no 135v

Posted by Robert Smith on

  • 1 more comment 
  • mrdarren Dec 10, 2007

    I just replaced the H.O.T. and the TV worked for 3 days then dies again. I know it's the H.O.T. but why did it shot out again....

  • Anonymous Mar 03, 2008

    Tv won't turn on 5 volt relay clicks about four times then nothing no picture or sound.

    any ideals to problem?

  • Anonymous Mar 03, 2008

    Tv won't turn on 5volt relay clicks 4 or 5 times then nothing.



    Any ideals?

×

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Try removing the horizontal output transistor, and see if ther 135 comes back up. If it comes up a litle and shuts down replace the horizontal output transistor and the flyback transformer. But I must warn you of the extremly high voltage thats inside this set whn its even unplugged. Be carefull!! Good Luck

Posted on Jun 28, 2006

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

95 silverado 5.7 engine stalls while driving. If I sit for FEW minutes IT starts and goes about 5 miles and STALLS again.

SO WHEN ENGINE STALLS DO HIGH LAMPS DIM OR GO DEAD?
TOO>?
Can you stop or delay the stall with a fast right foot action?
the time to diagnose it as at the stall.
not after the few minutes, later, you can not fix later as it is not broken yet.
can be caused by 50 things
but on macro mode.
bad engine
bad spark
bad fueling ,be it too little or too much.
when parked and dead does WOT cranking make it start and run/
wot= wide open throttle.
or dead engine crank it with 5% (a tad) throttle) start now, when dead./?
running 27 year old spark, plugs, wire sets ,distrib cap and rotor?
OLD PLUGS NEED NOT BE HERE, AND NEW GAPPED CORRECTLY
TRY NKG PLUGS,OEM SPEC TYPE.

LEARN HOW TO THE THE ECU CEL LAMP FLASH (BLINK CODES)
AT ENGINE DEAD?
PER SERVICE MANUAL WAY (JUMPER WIRE TO DLC)
0helpful
1answer

Red light blinking and tv won't show a picture or you can't hear anything but the fan or something the model # is kds-50A2000

Hello,

Your power supply board is dead, you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this help in solving the problem.....
0helpful
1answer

I have a Sony kdf55wf655, just replaced the lamp, acts like it wants to turn on then clicks. and still on standby mode. It will blink 3 times pause then blink 3 more time. Did I get a bad lamp? or what...

Ur hear alots clicking,but no picture come on?Yes,than the tv Ballast board is also dead.This tv Ballast board,job is to help to ignite the tv projection lamp.Tries websites like Partstore.com,Ebay.com to buy a new tv Ballast board for the replacement.
1helpful
1answer

Sony wega kdf42we655 power led blinking red

If lamp light is on at tv front then replace lamp as existing lamp sounds dead/ broken.
Lamp replacement procedure would be written in user manual of tv.
And if lamp light is not on but standby light is blinking then let me know how many times it is blinking to find out problem cause as standby light blinking is an error code.

1helpful
1answer

The screen won't turn on. The tv just clicks and

The power board ic coverter it dead.
U need to replace the power board.
U can go the web and buy this board changes
or get the tv repair man replace part and labor $575.
0helpful
1answer

No picture, TV dead and the relay on the power suply cliks once

Did you replace these Items?
IC1509(V out) i
Q1505(V Pulse Buffer)
0helpful
1answer

Sony KV-27S46 tv has no picture, no sound, 4 flash diagnostic.

4 blinks Indicates For Your Exact Model To Replace D606 (P/N 871910818) SCR.
Also Please Don't Take Out Your Anger For Your Broken Device On Me. Sony Knows Of This Problem As It Is Very Very Common So If You Want You Can Call Them And They Most likely Will Have Your Exact Fix.
0helpful
2answers

Our sony will not turn on, we hear the click but nothing.

The 7 blinks usually indicate a high voltage problem (voltage too high). It can be a simple regulator problem or something more complex. Please update this to confirm your model as KV-32FS120 and some indication of whether or not you wish to attempt the repair yourself.

Thanks,
Dan
2helpful
4answers

KV27S42 dead - 4 blinks

the +13 and -13 are generated by the flyback transformer as well as the 200 volts. the 135 is your B+ voltage and sould be there at start up. check the HOT and the Flyback. if there is no 135v check IC1751 on the C board sometimes if bad it loads down the 135v line. and can give a faulse vertical error.
0helpful
3answers

Sony FD Trinitron WEGA KV 32FS120

Hiii...
I'm not certainly sure how many time the led blinking ?

I hope hear from tou soon...

Thank's

[Vrya]
[email protected]
Not finding what you are looking for?

129 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2351 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...