How can I program my RCA VR105 VCR without the remote control

SOURCE: lost my manuel "codes" to my rca universal remote control crk74ba3

This website should help.
http://www.thompsontv.com/rcarc.html

SOURCE: RCA D770 dont know how to program--lost manual

Check this link to Wiki,

http://wiki.answers.com/Q/How_do_you_program_an_RCA_d770_universal_remote_if_you_don't_have_a_code_search_button

http://download.ethomson.com/english/RCA/ACCESSORIES/IB/D770.pdf
I had trouble with the ethompson link

Turn on device.
Press and hold the button for device you want to program ( TV etc),
press the on/off button and hold until the LED turns on, and then release both buttons.
Then, point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing. If the device does not turn off, then continue to press play and wait the required interval (for a maximum of 20 times) until the device turns off.
When the device turns off, stop pressing play.
Press REVERSE, wait two seconds and continue doing this until the device turns back on.
To finish programming, press and hold STOP until the LED turns off.


I had trouble with the ethompson link

SOURCE: rca rcr460 remote control programming

rca rcr460 will control dishpvr

SOURCE: HOW TO PROGRAM RCA RCU310 Remote Control

Thanks the instructions worked out fine...Much appreciation !!

SOURCE: RCA GuidePlus Gemstar Universal Remote Control 242524

i need to program my remote for my tv with this gemstar universal remote control "crk76te1 . how do i do this ? its for a zenth televison . thanks