When I switch on my Sony Cybershot DSC-P72, the LCD display keeps flickering for almost 10 mins before the picture stabilizes. If I attempt to take a picture while the image is flickring, the photo too comes out incoherent. Once the display stabilizes, I can take a few pictures but the image in the LCD display begins to shake again after a while. I have tried changing batteries but no improvement occured.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Error messages can be found at https://www.sony.com.au/electronics/support/articles/00008857. E:62:10 has nothing to do with the LCD but is a generic error of the stabilizer. This is a very well known problem that happens a lot and still today with Sony camera's. After less than 3 years of use the stabilizer breaks down, making it impossible to take sharp pictures, and displaying the dreaded E:62:10 error message. Thousands of users on the Internet have the same problem, read the website http://sony-e-62-10.atspace.cc/ or search E:62:10 on the Internet or on YouTube. A temporary solution could be available at https://www.youtube.com/watch?v=S53D3EfDVk0
This happened because you are not a camera repair technician. You took a complicated piece of electronic equipment apart without any knowledge of what you were doing. I'm glad that at least, your pics turn out.
This is a problem with the internal lcd components or the lcd screen itself. Have you downloaded the pictures off the camera? Your options are repair or replacement. Follow this link for repair through sony: https://eservice.sony.com/webrma/web/index.do
If light is good and picture flickers, then it is either a bad LCD ribbon cable, or cable not well placed into connector, or a bad LCD display, usually it is the cable. If picture flickers like light is dimming out and coming back, then it is the LCD lamp, probably in need of replacement. In some rare case a faulty Video card is causing the problem. Usually to fix this you need to take apart LCD display and upper laptop plate, to reveal the display cable.