Question about Jura Capresso Impressa S9 Coffee Maker/Espresso Machine

1 Answer

Thermoblock jura impressa s9

Thermoblock location jura impressa s9

Posted by Anonymous on

Ad

1 Answer

acehead

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 107 Answers

Hi, I made some videos how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Posted on Mar 23, 2015

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: Jura Capresso Impressa S9 water won't pull into the unit

mnbkjnjk

Posted on Jun 16, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: Jura Capresso Impressa S9- no steam

Hi,

Great solution - solved 80% of the problem I had - would also add to check the pressure relief valve (back of pump where water lines to thermo blocks attach). Noticed presure was still low after cleaning solenoid. Ran steam with cover off top (cup warmer plate) and notice water flow in clear line at top (you will see the line). Went to pump, pulled off hose block at back of pump, and popped (carefully) off the black cap which separates the water to the brewer from the steamer. Cleaned this needle and seat, and the spring too, and the pressure now is extremely high at at the steamer wand. 100% fix now.

Posted on May 12, 2010

taran_2005

taran_2005

  • 10515 Answers

SOURCE: My Jura Capresso Impressa S9

Hi,

This error is due to the coffee sludge built up in the system and needs you open the machine and clean it.

Note - Capresso recommends that you unplug the unit, wait a minute, and then plug in and turn on. Try twice if the first time doesn't work. If you still have a problem, call Capresso, and if your machine is under warranty they will repair it for you free of charge and even pay shipping both ways.

For cleaning instructions, let me provide you with a generic link that would help you :

http://www.buessert.de/Technik/Jura-IMPRESSA-S95/Cleaning.htm

Good Luck!!

Thanks!!

Posted on Aug 19, 2010

Darryn O'Neill

  • 115 Answers

SOURCE: my jura Impressa S9 chrome keeps shorting out and

Hi.Id check the solenids and pumps. Most likely to be a pump. Their positioned under the water tank. Full disassembly of the machine panels, a must. They slide out when your there. dazza

Posted on Oct 13, 2011

Andrew

  • 1 Answer

SOURCE: I have a Jura Capresso Impressa S9 and it keeps

Where the contacts attach to the drip tray on the inside is where I had some coffee ground "sludge". It was making a weak electrical connection between the two contacts. As soon as I took a fine scrubber sponge to get rid of the build up - the Empty Tray message went away when I put the tray back in.

Posted on Oct 23, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jura x9 says rinse fill


This happens when the machine is priming the thermoblocks(heaters) the machine is not registering water flow through the machine.blockage in water tank? pump not running? a thermoblock scaled up(blocked). first check the 2 flow meters in the machine located under the water tank. one of these may be defective or just stuck,

Aug 29, 2014 | Jura Impressa X9 Espresso Machine

1 Answer

Jura impressa s9 is displaying error 1


The Owner Manual for the Jura Impressa S9 One Touch identifies Error 2 as being too cold and disabled for safety, but simply instructs to "Turn the IMPRESSA off at the power switch. Contact Customer Support in your country." for all other errors.

See Online Manual: http://content.costco.com/images/Content/Misc/PDF/OwnerManual-671992.pdf

Apr 29, 2013 | Jura Impressa S9 One Touch

1 Answer

Any idea what brand of tubing connectors Jura Capresso uses on their machines and where I can get repalcements? The right angle connector going into the boiler is leaking along the seam.


Legris,
but shorten the tube 5 mm, if the leak is at the tube side.
Mostly it helps.
otherwise change the thermoblock, there are new connectors in.

Nov 23, 2011 | Jura Capresso Impressa S9 Coffee...

4 Answers

How do I fix a 'storing 4' (error 4 in Dutch) myself on my Jura Impressa s9 machine (7 years old)? Is there a clever way of taking the back panel off to access the internals without breaking anything ?


error 4 is the ntc sensor on the top thermoblock
change it and the machine will be fine
to check just measure the resistance of the sensor , it should be 12Kohms with room temperature.... the warmer it gets the less resistance
a other quick way to check it is changing it with a resistor of around 330 ohms
the machine will work properly only it thinks the temperature is good while it may not be warm enough yet

to reset the error press the 2 middle buttons for a few seconds while in standby mode

Feb 03, 2010 | Jura Capresso Impressa S9 Coffee...

2 Answers

Impressa S70 - Malfunction 3


This indicates that either the sensor for the thermoblock is defective or the thermofuse is blown. For this you need to go to your local dealer for service. I also recommend that you measure out the mains.
In worst case the powerprint or the mainboard sends wrong signals to the thermoblock so it`s overheated.

Aug 02, 2009 | Jura Capresso Impressa E8 Espresso/Coffee...

Not finding what you are looking for?
Jura Capresso Impressa S9 Coffee Maker/Espresso Machine Logo

Related Topics:

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

markybean

Level 1 Expert

41 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...