My TV was working fine, then one day I went to turn it on and the screen was dead. The remote turns on the small red light and the tv makes a click sound as it does when the picture normally comes on but there is no picture. It was working fine the night before.
Your help would be appreciated
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: My TV screen has no picture
If the light goes out you definitely have a short somewhere. If it blinks you have a fault, probably in the High Voltage circuit. Most common problem is a shorted Horizontal Output Transistor. Unless you are an experienced technician you probably need to have a reputable repair facility look at this one. Most will give you an estimate for free or for a small fee which will be deducted if you decide to have them fix it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Normally on the Panasonic tv this will call for a service call. The key to getting it repaired correctly is to check for a certified Samsung repair shop because most of the parts come from Samsung. Now if you want to do your own research call to 800 number for Panasonic Tv see if there are any problems with that model that the manufacturer has extended but does not post. I had one repaired that the red light on also so I understand and it went out approximately 4 3/4 years. If your in the Atlanta area use Norman electronics they have repaired hundreds on tvs for me due to my work.
Sounds like you have a short somewhere, probably the Horizontal Output Transistor. If there is a fault the led you mentioned probably should be blinking. You probably are going to need a tech to look at this as it is a very complicated process of elimination.