Question about SanDisk Sansa e250 MP3 Player
Ok so heres the thing. I Pluged in my Sansa e250 player to charge it and when I look at it its at the screen that comes up when you turn it on. All it does is show that then the screen goes white and it does it again.over and over and over. I have no clue whats wrong with it.
Yea ok that helps but for computer iliterate ppl :P such as myself ahaha
how dyou format the MP3?
and how do you find out what formating it needs?
Posted on Mar 10, 2008
Help me plz...
can`t use samsung yp-u3..i think the system have an error..n also can`t sync/connect to pc with usb-port..what problem with the yp-u3..how to get back the yp-u3 normaly..thx..n can i get the solution to my email?
Posted on Jan 09, 2008
Hey thanks alot soldierruel for the info to reformat my e250 it works great now
Posted on Jan 26, 2007
Yes I agree with the other comment. What you have to do now is reformat the unit to its original fat system file and reinstall the software. also Check the battery for its capacity if its below 3.7v, say it might read 2.5v then you'l have to rejuvenat the battery to its original capacity.
Posted on Jun 20, 2006
If this problem is connected to the other one you posted on this problem, then you probably deleted system files when you did the format, and now the player wont be recognized by the PC. that's the problem you have to solve. It's also possible that when you formatted the player by mistake, you formated it in the wrong format and now you can't finish the firmware install because of this. Check what kind of formatting it needs ( fat - ? 16/32), and format it again accordingly. Next time try adding a comment to the older post when it might be relevant. It can only help whoever reads this to better understand your problem. Good luck
Posted on Jun 18, 2006
I have this exact same problem to the letter. I've never formatted or deleted anything and my player is pretty new. I can't format now if i wanted because when its busy resetting over and over it won't show up even when connected to the computer. The only way to even get it to stop is to turn it off by holding the button to do a hard shutdown. The holding menu for 15 seconds doesnt do anything either.
Posted on Jul 06, 2006
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: