I have Mit WS55807 about 5 yrs and I do have a problem with my tv about 2 months. It is experiencing the "bow-tie" effect, where the (in my case) the red and green is off, and squezed in the middle. How can I fix this problem by myself?
If your not a tech, its highly advisable to not even open the set because of the high voltage and x-ray radiation issues. Now if your a technician ,you gonna need to get a service manual, Look up the convergence circuit, Find the two or three convergence driver ics, find the b+ feed resistors to those ic, and order the exact replacement parts. if you dont replace all at once, and with exact replacements, you will be in the same boat a few months down the road. This is not a repair a handi-person should consider doing as even if you get the ics replaced, your gonna need to do some minor or could be major convergence alighnment and your gonna need a cross hatch generator to do this. This repair should cost ya about 300 to 400 bucks? Sorry man Good Luck
Posted on Jun 14, 2006
229 views
Usually answered in minutes!
Thanks for your in-depth of inside tips. As you advised and since I am not tech, I think I should get some help from expert.
×