LEXMARK 1240 ALL IN ONE PRINTER

Hi

How many time your reuse this cartridge, my cartridge life is over, pleas buy the new cartridge from Lexmark service centre..

Seeing as the printer was working before you had it filled at Walgreens, I would have to say that there is a problem with the cartridge, buy a new one and if it doesn't work try to find a new Lexmark that can use this cartridge!

If you have refilled the cartridges 28 and 29, it's pretty normal that your printer won't print. Those cartridges are not for refill (they can be refilled, but won't work once the printer says they are empty). If you have refilled a 28A and 29A and it doesn't recognize the one of the cartridges, try removing them and clean the electric contacts with a dry cloth. Put them back in. If that doesn't help, I suggest you buy a new cartridge.

Hi there

This is the same old story with Lexmark printers, you cant do any thing about it the chips have a small fuse inside them and soon as they emty it blows the fuse, and thats it so I beleave the only way is to buy new ink, or a diferent printer.
Not know any fix for them myself sorry.

Can try.
Turn printer off. Unplug power cord and other cables. Wait 30 seconds. Plug cords and cables back in.

Also seen this on the net.
Use clear tape over left hand row of sensors on front of cartridge and re-insert. ink now shows with question mark but reads as full and prints fine.

but yeah, best bet, never ever buy lexmark.....:)

http://www.fixyourownprinter.com/forums/inkjet/35235


If that doesn't work, try disabling your ink monitoring software.
All The Best Pineworks

Hello!
28 and 29 are not meant to be refilled. They can physically be refilled, but they won't work. That is because Lexmark has put in a smart chip that doesn't allow refill.
You need to buy 28A and 29A or 34 and 35, those cartridges can be refilled with no problem.

If you find my answer helpful, please vote. Thank you!

Check to make sure you have removed the plastic covering on the new ink cartridge contact.  Run a calibration/alignment test on your printer. (If you're not sure how to do this, Google "how to align cartridges on----- your modle printer).  Finally, you may want to do a "hard-reset" on the printer. Turn it off, unplug it for 30 seconds and try again. Good luck!

When you try refilling your ink cartridges, you are taking chances that something may go wrong. I would search the web and purchase re-manufactured ink cartridges, which would be less expensive than the new ones from Lexmark.

http://www.ink-refills-ink.com/printer/Lexmark+X5495+Ink/15981/?src=gpsearch&gpprod=Lexmark+X5495&gptype=bulk

http://www.internet-ink.co.uk/lexmark-ink-cartridges-X5495/
Please remember to rate all users who assist you for free :)



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Walgreens had gave me the wrong print cartridges back. They had my info on them but they belong to a HP printer instead of a Lexmark. We took them back and had to go thru a lot to get them straighten out. My cartridges were nowhere to be found so I'm sure the HP customer will be looking for their cartridges also. From now on no more refilled cartridges for me. Lexmark only! Thanks for the help.

First of all lexmark doesnt support refill carts. but what u can do is reseat the carts & then press the options button till u see cart new both. & then select both the blk & clr as new. it should work other wise buy new carts

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
921