KLH R5100 Receiver Logo

Related Topics:

Question about KLH R5100 Receiver

2 Answers

Workn my system

I can only get two of my speakers to ho do i get all my speaker to work

Posted by 80oldsblueba on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Connect your speakers to the appropriate terminals. Turn on the power. To the left of the Mode Set button at the lower center of the panel you will see a button "Test/Setup". Press this button and you will hear tones generated through the speakers, one at a time, and upon completion of the cycle you will see a display of the speakers that were found. It this doesn't match what you have connected, either you have a bad speaker(s) or there is something wrong with the receiver.
There are no A - B switches on this receiver.

Posted on Nov 30, 2008

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

There should be a botton on the receiver that say for example, Speaker A, Speaker B, Speaker A B witch would be all of them, if your refering to surround sound try the Prologic

Posted on Oct 19, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Output to speakers very low

Check your speaker wire connections and make sure they are connected properly and be sure that the +/- leads are not flipped
0helpful
1answer

Need schematic for harmon kardon ho-595 subwuffer

I had the same issue, definitely check your cable. if that's good try a different outlet. i had mine in the surge protector when it was making the high pitch sound. when i just went straight to the wall outlet by it self it worked great. hope this helps.
0helpful
1answer
0helpful
1answer

MERE COMPUTER MEIN AUDIO DRIVER NAHI INSTALL HO RAHA HAI. PLZ SOLVE THIS PROBLEM.

kisi computer dukan mein ja kar ek USB Sound card adaptor kgareedlo...picture daek lo neeche...sayad...150 Rs ka hoga...
is adaptor mein speaker aur mic ka jack daal do...kaam ho gaya...b0015f0.jpg
0helpful
1answer

I hv a hp pavilion dv6- 3017 TU. I bought it only 2 months ago and its speakers arent workin...............help?

be sure speakers properly connected to the system in speaker out? if yes then check the speakers working or not? if speakers workning connecting another audio device then Reinstall the audio drivers

good luck
2helpful
2answers

My kdc mp142 is saying protect and not allowing me 2 turn it on

Your unit is seeing a speaker that is shorted. Disconnect them one by one until the protect goes away then check the wire and speaker for a short.
0helpful
2answers
0helpful
1answer

Speaker problem

i would ring up iriver and say my speakers dont work and u might be able to send it back to get it fixed
0helpful
1answer

Crackling and popping sounds in surround sound speakers

Could be your head unit or the connection to the speaker may be bad. Also if the wire to the speakers in your ceiling is bare and touching any ground it would interfere. Start by checking connections by playing something and messing with wires. Listen for a difference. Next check by putting the wires that power those speakers in a known working output and listen for different quality
Not finding what you are looking for?

81 views

Ask a Question

Usually answered in minutes!

Top KLH Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Gil Shultz

Level 3 Expert

3464 Answers

woodzowl307

Level 3 Expert

679 Answers

Are you a KLH Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...