Display not lighting up

My son squeezed my phone real hard and now the display won't light up. Several weeks later, the ringer started ringing at a lower volume. This volume lowering continued until now I cannot hear a ring at all. Can you tell me how to fix this? And what parts should I get? It would probably be cheaper to just get a new phone, but this one was my first cell phone given to me by my granddaughter and I would love to repair it and just save it for sentimental reasons.

mobb1 Nov 21, 2007

screen not lighting up can you help please
montenido Apr 14, 2008

Hi, my 6102i suddenly stopped lighting up when a key is pushed. I can barely see the display now. Any tips on how to fix it?

Thanks, Montenido

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.
Expert
175 Answers

You need to repalce the LCD if the phone is open try reattaching the LCD and the buzzer. Also try and clean the contacts with an eraser, it will work. Good Luck.

Posted on Jun 12, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Turn ringer on

To set the Vtech T2326 ringer:
there are only four ringer tone/volume choices plus "off" available

1. Press the PROG end of the "SELECT/PROG" rocker switch.
The display will light and show "DIRECTORY"

2. Press the right side top button "VOL +/DIR"
The display will change to "SPEED DIAL"

3. Press the right side top button "VOL +/DIR" again The display will change to "RINGER: [number] ( 1 - 4 or OFF )"

4. Press the SELECT end of the "SELECT/PROG" rocker switch.
The "RINGER: [number] ( 1 - 4 or OFF )" will blink and the ringer will sound.

5. Press the right side top button "VOL +/DIR" The display will change from "RINGER: 1" to "RINGER: 2" and the sound will change accordingly.

6. Press the right side top button "VOL +/DIR" again. The display will change from "RINGER: 2" to "RINGER: 3" and the sound will change accordingly.

7. Press the right side top button "VOL +/DIR" again. The display will change from "RINGER: 3" to "RINGER: 4" and the sound will change accordingly.

8. Press the right side top button "VOL +/DIR" again. The display will change from "RINGER: 4" to "RINGER: OFF" and the sound will cease accordingly.

9. Press the right side top button "VOL +/DIR" again. The display will change from "RINGER: OFF" to "RINGER: 1" and the sound will change accordingly.

10. ...and so on, cycling through the four choices & OFF: when you decide to select one, press the "SELECT" end of the central "SELECT/PROG" rocker switch.

11. The display light will go out, the phone will chirp in acceptance, and it will be ready to use the chosen ringer. --

Read full answer

Sep 07, 2013 • Vtech T2326 Cordless Phone

2helpful

1answer

The ringer doesn't ring, only vibrates. I select "settings" but there is not ringer volume level so I can hear the phone actually "ring', it only vibrates

First, make sure your Jitterbug is open and confirm it's on.

Next, Press the volume button on the outside of the phone below the Outside Display. Press the top of the button to increase the volume and the bottom of the button to decrease the volume.

There are several ringer options available to choose from. If you need additional help, you can call a customer service expert available 24 hours a day 7 days a week at 1-800-733-6632 and they will walk you step by step through the process.

Read full answer

Dec 27, 2010 • One Touch Jitterbug One-Touch Cellular...

6helpful

1answer

Kx-dt333 phone rings, red light flashes but no ringer sounds ... ringoff is displayed on screen how do we switch to ring mode?

You can press the softkey under RingOff and the up arrow on the Navigator button, or just press the up arrow on the navigator button two times. The display will show the ringer volume level as you continue to press the up arrow.

Carl

Read full answer

Oct 26, 2010 • Panasonic KXDT333 Phone

1helpful

1answer

We have the Avaya Partner phone at work and no one can figure out how to silence the ringer. I can get the volume down but not off.

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing..

Press feature "00" to logout

Read full answer

Sep 22, 2010 • Avaya 700340193 Corded Phone

0helpful

1answer

How do I turn off the ringer for the fax line?

I'm guessing that the fax line also appears on the telephone sets and rings on them.
Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Read full answer

Aug 24, 2010 • Lucent PARTNER18 Corded Phone

10helpful

1answer

I would like to turn off the ringer on this phone for incoming calls.

Read full answer

Aug 20, 2010 • Avaya Corded Phone avaparp18d

0helpful

1answer

I do not know how to turn the ringer on

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Read full answer

Jun 15, 2010 • Lucent PARTNER18 Corded Phone

7helpful

1answer

How do I turn off the local ringer on my office phone, AT&T MLS12D

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

Press feature "00" to logout

Read full answer

Apr 29, 2010 • AT&T Lucent MLS-12D Phone

0helpful

1answer

My uniden tect1580 doesn't ring

Hi,

First thing to try is while the phone is in "On-Hook" mode, press the up key on the handset several times, you should hear a beep each time you press the button and the display should show "Ringer Volume" with a graduating series of bars. If the display shows as above, but you do not hear any rings, try pressing the "Speaker" button and listen for the dial tone. Most of the time on these phones, it is a simple matter of turning up the ringer volume, but sometimes, the handsfree speaker (Which also acts as the ringer speaker) goes bad. If the speaker is bad, it is a fairly easy replacement if you are handy with a soldering iron.

Read full answer

Feb 17, 2010 • Uniden DECT 6.0 Cordless Phone ID

0helpful

1answer