Question about Toshiba 62MX195 62" HDTV

1 Answer

Hi! I am experiencing the following three

Hi! I am experiencing the following three problems: • Blinking LED,won't turn on, • 3D,ghost picture, • Start-up problem, etc... First I was getting a 3D "Red" shadow type ghost picture which following the TV images around. It had a good picture other than getting a RED Blurr on the picture. So, I took out the Projector Light and reinstalled it. Now I have the following problem: 1.) No sound nor picture. 2.) Blinking LED,won't turn on? When I power TV on the small Blue & Yellow LED lights on the front of the TV that indicate if TV is on or off; keeps changing back and forth from Blue to Yellow every like 5 or 10 seconds. 3.) Start-up problem, etc... A.) Please let me know what to do to get the tv to work. B.) What is causing the Red Picture Blur or ghost type smudge on TV screen and how can I fix it? Your assistance will be very much appreciated. Thank You, Ralph

Posted by Rafael Perez on

Ad

1 Answer

Jdvillanueva

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 2,098 Answers

Hi Rafael,

First of all thank you for posting your question here at Fixya.
Please confirm if the brand and model number above is correct.
Blinking of the the LED (yellow and blue) at the front panel indicating that the lamp door cover is not seated properly. This cover will engaged to a micro switch giving the signal to the processor, once it is in open position, the unit will not power up and will experienced that kind of blinking error code. Go back to the lamp door cover and ensure that it is properly seat-in.
3D, 2D, red/green/blue ghost on the picture and letters means that the convergence circuitry gone bad. Symptoms is not connected to the light engine. The faulty parts is the convergence chips(IC). This chips are mounted on the large aluminum heat sink and starts with STKXXXX-XX (X means number). The most common STK chips used on Projection TV's is the STK392-110. You have to replaced them both on the board to resolve the issue(red ghosting). It is necessary also to check the resistance value of the resistors around its circuitry using the multimeter. For more info how to repair a convergence problem, watch the video below.




Jdvillanueva

Posted on Jan 27, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG 32LM3400 turns on and light flashes three time but no picture


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

If blinks continue without any pause, the main board is faulty.

Jun 24, 2016 | LG 32LM3400 32" LED TV 1366x768, 100 Hz,...

1 Answer

Powers on then off with 4 red binks then 2 amber?


A blinking red and yellow Status LED will indicate an Error Code that can help determine the cause of a circuit
failure.
• The number of Red blinks indicates the value of the (tens digit) of the Error Code.
• The number of Yellow blinks indicates the value of the (ones digit) of the Error Code.
Example: If the Error Code is "37", the LED will continuously blink Red three times, followed by blinking Yellow
seven times.

25846923-00ymvd0zfh3oypxbgkhcneuw-4-0.jpg See the following for a list of Error Codes.
To perform a System Reset, press and hold the Power button for 10 seconds. Or, unplug the set for 10 seconds
then restore power.

http://electro-medical.blogspot.com/

25846923-00ymvd0zfh3oypxbgkhcneuw-4-2.jpg

Sep 02, 2015 | Mitsubishi WD-73638 3D-Ready DLP HDTV

1 Answer

PS3 3D TV Display Doesn't turn on 2 red blinking lights


HI, in this video you will find how to fix your Sony 3D Display
https://www.youtube.com/watch?v=OdPGSZnTIPw

Dec 02, 2012 | Sony PlayStation Televison & Video

1 Answer

Bravia NX720 55


I have the same problem, called sony up but they are not responding back. The tv is still under warranty and brought it from Amazon. My situation is same but my led error code is 4 or 5 flashes. Does any one knows what's wrong with it.?

Sep 09, 2012 | Sony KDL46NX720 - 46" BRAVIA NX720 Series...

6 Answers

Two red light are blinking and show general error


Hi. My epson T50 printer is flashing together two orange lights showing general error, have reset ink pad with software but still the same problem. Any ideas would be great. Thanks Jim

Mar 13, 2012 | Epson T50 InkJet Printer

1 Answer

TV will not turn on? Blinking LED,won't turn on? Changing back and forth from Blue and Yellow; which is on and off from panel lights?


the red picture is because the optical block is bad now this part cost about $500 plus labor , when you took the lamp out you need to put the door back otherways the tv wont wort

Jan 27, 2012 | Toshiba 62MX195 62" HDTV

1 Answer

Sony won't turn on


Hi,

Please let me know the exact model no. of your TV to accurately diagnose where the fault came from. Also, please check what is the status of the LED at the front panel, does it has a steady, blinking light, if blinking, please count how many times it will flash. Some of the blinking LED denoting an error code.

Jdvillanueva

Dec 15, 2011 | Sharp LC-32SB21U 32 in. LCD TV

1 Answer

When the tv is turned on I hear a loud grinding like noise


Hi,


May I know if the unit won't power up, has a three blinking led light at the front panel? Also, please check if the grinding noise is near the lamp assembly.


Mjsazon

Dec 01, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

Hi, my name is Alberto and I'm the owner of a toshiba led 3D 46wx800u. I connected my PC to the TV via HDMI, and I configured, from my pc, to watch the desktop of the windows only from the tv using...


Hello Albertojhern,

You should not be able to cause yourself any problem
in the manner you described (source issue).
((and your ENGLISH is VERY GOOD)).

I believe you are experiencing a power supply failure
(you MUST check this number YOURSELF).
Possibly Toshiba V71A00017700 Power Board.

Shopjimmy.com has a 180 day guarantee for your replacement power boards... (a decent guess: see below).

Also check Sears... Prices are better...
(below: didn't respond to me but I don't like them)

The "blinking lights" mean that there is enough basic sanity
for your TV to know it is failing a power-up sequence...

Toshiba-46wx800u... Look up the board numbers yourself after you have copied them DIRECTLY from the Printed Circuit Board with the ALUMINUM heat syncs... (inside your set)
and all the capacitors (usually the point of failure).

Amateur (novice) repairs are usually discouraged by the
manufacturers... but with a little cae you can get in & out of your set WITHOUT DESTROYING IT... Or HURTING yourself.

Three TERRIBLY important points:

1). The circuit boards easily available from
eBay (and other sources) are too inexpensive
to advise any NOVISIATE repair person to
take LIVE VOLTAGE MEASUREMENTS.

2). Anti-STATIC wristband must be worn when handling semiconductor boards (the smallest SPARK (you
might not even feel)) can utterly destroy all
semiconductors ...

3). Every wire and plug should be PHOTOGRAPHED
BEFORE any work is commenced. Suitable detail to
DIRECT all wiring re-assembly.

Follow these basic steps and you can get in & out of your TV safely.

If you have a HIGH QUALITY low impedance
volt tester... and DON'T MIND the RISK of ELECTROCUTION...

The voltages are generally WRITTEN ON THE
POWER BOARD itself.

AGAIN... This I do not recommend.

Toshiba power supply for 55VX700U 55WX800U 75020368 eBay

Source: shopjimmy.
Search results for 46wx800u power board

Sears (
http://www.searspartsdirect.com/model/search.html?q=toshiba%2046wx800u

Carnac the Magnificent

Mar 28, 2017 | Toshiba 46WX800U 3D LCD TV

4 Answers

42hl67


I had lcd 42" over a year it is working find before , but now it has very dark picture

can y help me to find out what is a problem and how much to fix?

May 01, 2008 | Toshiba 42HL67 42 in. LCD Television

Not finding what you are looking for?
Toshiba 62MX195 62" HDTV Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76544 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...