At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Where can I purchase a new front lense or screen for this tv. It got scratched in a move from 1 house to another. How much will it cost or can I get one cut by a aftermarket company? Or do I just need to trash the whole tv?
I looked about an hour to find a factory service or parts # for ya But to my surprise I found 0 . I wouldnt through out the set yet. See if you can find the owners manual and there has to be a contact # bin there or go back to wjere you bought the set. Sorry i tryed . Good Luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's possible the mirror has dome dust on it from jostling during the move. W dried water spot will do it too. The front screen will come off by removing the screws on the bezel. Be extremely careful cleaning the mirror.Any scratch by a cleaning cloth (never use paper) will permanently ruin it.
Your set needs to have both Convergence ICs replaced they are Both STK392-010 you can get new ICs at the following link and they provide free step by step instructions with pics so you can do the job yourself which takes about 45 minutes. Heres the link. http://servicemanuals.vstore.ca/
I just had that problem. Check the terminal board that is on the left if you open the back of the TV. There is a thing in there with the number aa93-something. If you check under that board there should be some solders that have come loose. I just fixed this problem last night!!