Sony Trinitron KV-32FS12

Blinking of standby light are fault indications. How many times the standby light blinks at a time. Count it, and inform me.

In standby mode (red led on/after the led stops from blinking), press "Display", "5", Volume (-)", "Power on" on the remote control in sequence, self diagnostic screen will be display, let me know the what is on the screen to diagnose where the fault came from.

Problem with the Sony Trinitron KV-J16PF 20" TV The standby/timer light keeps flashing red

the number of red light flashes indicate where the fault lies...sony error codes are easy enough to find if you google the model with the number of flashes.hope this helps somewhat as you dont say how many blinks!!
regards,steve.
ps.line output transformer failure rates are quite high on these sets,usually resulting in two red blinks-pause-two red blinks-pause etc...

you have to check you timinig on/off setting.

this specific type of TVs flash their standby light if the onboard testing system sniffed out a problem

so, as if your TV is trying to tell you "i have a problem and i need to be serviced"

i hope it goes well for you
:D

My Sony trinitron has the stero lite on steady and standby lite flashes four times then pauses and repeats. Can you tell me the circuit/condition causing the set to not turn on.

Replace IC8002 MCZ3001d Sony part number 670581001
this ic drives and regulates the High Voltage section.

The model number is KV-36FV15 and blinking is constant no pause

6 blinks is usually the D board