Question about Onkyo TX-DS575 Receiver

1 Answer

Onkyo receiver the unit went on and then shut down. hit the power again sparks shot out of the bottom. I shut it down, after several minutes hit the power button, and it went on and shut down again on its own. It just lights up and shuts down.

Posted by Joel Srebnick on

  • Joel Srebnick Jun 05, 2006

    I also hear a clicking sound when I turn it on and it shuts itself down. II think it may be a transformer?.

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

It sure dosent sound good!! The clicking sound you here are the protection relays to assist in protecting your speakers from blowing out. Your output devices are shorted it sounds like. Do not ever ever attemp to jump out those relays as it will burn out your speakers and possibly burn down your house!. Theres alot of current inthese amps for high power so if your not a tech and you think its worth it take the unit in to be looked at as there are no serviceable user parts inside these units . Sorry to have to tell ya this.. Good Luck

Posted on Jun 05, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My onkyo ht-r590 goes on then shuts off right away.


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.

Oct 01, 2014 | Onkyo HT-R590 7.1-Channel 3-D Ready Home...

1 Answer

Onyko tx nr616 receiver keeps shutting off. Only stays on for approximately 3 seconds. Can you help?


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.

Sep 30, 2014 | Onkyo Tx-nr616 7.2 Thx Certified Network...

1 Answer

How do i check to see what is causing my receiver to shut off


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.

Sep 25, 2014 | Onkyo Audio Players & Recorders

1 Answer

Onkyo ht-rc180 standby light blinks will not start.i tryed factory reset, still blinks


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.

Sep 24, 2014 | Onkyo Ht-Rc180 7.2-Channel A/V Surround...

1 Answer

Onkyo tx 8211 receiver shut off problems


Check all of your speaker wires and speaker turminals. I bet there is a short.

Apr 26, 2012 | Onkyo TX-8211 Receiver

1 Answer

Hi have a Onkyo TX-SR601 after using it for a while it shuts down.


The problem could be bad solder connections on the main, or the audio outputs are breaking down when they get hot.

Mar 11, 2012 | Onkyo TX-SR601 Receiver

1 Answer

I have an Onkyo Tsxr 577 amp. The wires on the speakers crossed and the amp stopped working. It might be in autoprotect mode and I don't know how to reset it.


The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately. Disconnect all speaker cables and input sources, and leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect the power cord and reconnect an input and a pair of speaker wires onto the unit. If the receiver still does not turn on than you will have to bring it in for service. Turn up the volume and if the receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all your input sources and turn on your receiver. If the unit shuts down again, your unit will need to be further serviced at an authorized Onkyo service center.


To obtain service, take or ship your Onkyo product to an Onkyo Authorized Service Center. Please also include in any mailing a contact name, address and telephone number. Please include a copy of the original sales receipt/invoice as well as a letter stating what the problem is, with your name address and phone number so the service center knows who to return the unit to. Please note, before shipping, you must contact the authorized service center to inform them that you will be sending your unit in for repair.

Feb 22, 2011 | Onkyo TXSR577 71 Channels

3 Answers

Onkyo HT-R501 7.1 reciever issues


i have the same problem with a onkyo tx ds494

Jan 05, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Onkyo SV828THX Power on


There is or seems to be a bad or cold solder connection on that Printed circuit board that is going to need to be resoldered or it can cause more damage to the unit. And on this model, the fan will start at power up but shut down untill the output section heat sinks get hot.

Sep 28, 2006 | Onkyo TX-SV828DSP Receiver

Not finding what you are looking for?
Onkyo TX-DS575 Receiver Logo

Related Topics:

257 views

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...