Question about Husqvarna Sewing Machines
The touchplate on My Designer 1 is often non-responsive. This can be frustrating, especially when I'm in the middle of a project. I have taken the machine in for service several times when this has occurred. The agent tells me every time that there is nothing wrong with the machine. Can you please tell me why this happens, and how I can rectify it. Thanks.
Posted by Anonymous on
I had the same dissatisfaction when I switched from the 1+ to the Designer 1. After some trials I am now happy. You need the springy free motion foot. Part #413 03 76-45. You take off the white shank and screw it on with the metal bar over the needle hook. In the set menu turn the SensorQ on, the free motion on, select stitch 1 from menu V and drop the feed dogs. It also makes a big difference to use the straight stitch throat plate which just has a small hole for the needle to go through. One other hint is that I often have to reduce my needle tension 3 or 4 steps. Hope it works for you.
Posted on Jul 02, 2008
Are you kidding me.....I can pay to be on your plan and you may suggest a solution.
But I can tell you how I fixed the problem for free??
I'll let you know for $19.95!!!
Posted on May 15, 2009
SOURCE: The touch screen will not
Hi, this is a common problem to any touch screen. Touch screens has lesser life than the machine. You screen has gone bad, and you may have to replace it. There is no troubleshooting guide. And there is nothing wrong with your machine. Just that the touch screen has gotten old and not working.
Posted on Dec 21, 2010
Tips for a great answer:
Mar 26, 2014 | Husqvarna Viking 1
Dec 13, 2012 | Husqvarna Rose
Jun 05, 2012 | Sewing Machines
Feb 26, 2012 | Husqvarna Designer I
May 23, 2011 | Husqvarna Designer I
Nov 24, 2010 | Husqvarna Designer I
Mar 20, 2010 | Husqvarna Designer I
May 30, 2008 | Husqvarna Viking 1
38 people viewed this question
Usually answered in minutes!