MediaForm 5908 CD burner buzzing

Will need the tender hands of a qualified repair person.

There are no software ore firmware updates. I would contact MediaForm and see if they have a compatible dvd drive.

Was there a "User Guide" supplied with manual?
Does it contain instructions?

Since this seems to be a "bulk" CD-copier,
is it possible that FIRST insert the "master" CD, and let the copier read everything from that disk, and then you start inserting "blank" CDs, to make copies?

Hi friend
I believe this piece of information will help you. The torque specification is 230 @ 3,000 rpm

um your overheating the drive they do not last forever

To download the manual for MediaFORM CD5908, please click the below mentioned link:

MediaFORM CD 5908 manual

Thank you

I was emailed the manual in which I had been looking for.

ok...start by removing the drivers from control panel, go to website and get new drivers, install them, try it again.

http://tinyurl.com/6qcpgy

I'm not entirely familliar with this system and also it appears to be discontinued from the manufacturer, http://www.mfdigital.com/ it may be possible to "clone" a disk from a working one using Norton ghost or something similar. (but that means finding someone willing to let you dissasemble their working one), with norton ghost you should be able to copy entire disk from the working disk to a new disk. the manufacturer does have a firmware update disk for this but that most likely only updates the system once it is working. Gareth

Take a look here http://www.fixya.com/support/p138332-mediaform_cd_3702_burner