- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
62-24084-02 LED CODES
POWER LED - GREEN
ON - Normal
OFF - No power to board
OK LED - GREEN
One Blink - One hour retry delay
Two Blinks - Pressure switch failure (remains open)
Three Blinks - Limit switch fault
Four Blinks - Pressure switch failure (remains closed)
Five Blinks - Twinning fault
FLAME LED - YELLOW
ON - Good flame
Rapid Blink - Flame present with gas valve de-energizing
Slow Blink - Marginal flame
try to acces the menu and to reset the display settings. try another monitor on your computer to be sure that your video board is working, and if it is change the resolution in 1024X768 and try again your dell display
I recently had the same problem occur on my LCD Panel and this is the response I received from ACER.
Thank you for contacting Acer America. I apologize for the inconvenience that you have experienced. If the green power on LED blinks rapidly, it means that the monitor is not getting any signal from the computer. It is possible that the monitor may have faulty internal component, I suggest that you send your monitor to a local repair shop to have it tested properly.
Respectfully, Acer America Online Technical Support