Pioneer PRO-710HD 64" Rear Projection Television Logo
Posted on Oct 13, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Pioneer 710 hd power/not turning on 10/12/08

Left this morning tv worked fine came home and went to turn on the red power light is on but when i hit the power button on tv or remote you hear a clicking noise like relays but the green light and the tv will not come on. can this problem be fixed and if so how?
thanks a bunch

  • feltz25 Mar 04, 2009

    tv works for about 1/2 hr to an hour then shuts off an hour later tv will restart how much am i looking at $$$ wise to fix?
    thankyou



×

1 Answer

Robert Jones

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 90 Answers
  • Posted on Nov 12, 2008
Robert Jones
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 22, 2008
Answers
90
Questions
2
Helped
21470
Points
106

When the set goes into protection BANG like that, without any intermittencies, usually the convergence ICs have gone out and need replacing. I recommend using the STK 392-180s, which are the stronger upgrade to the 392-110s used originally. You'll need 2.


Mr Bob
www.imageperfection.com
510-278-4247
bob at imageperfection dot com

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a JVC model HD-52G886 tv. that loses sound.

Replace or have replaced the Audio board in the set----a lot of them fail.
0helpful
1answer

Why will my pioneer pdp 6020 not power up?

make sure it doesn't have a vacation button underneath. I have had kids or movers inadvertently press that button and tv goes dead. outside of that. you have lost the power supply and will need professional help. pioneers are very sophistcated
0helpful
1answer

No picutre just black-loud pop when I turned it on

You may have blown parts, look inside and inspect the power supply module and the back light inverter board, I will leave the TV unplugged.
Please see my basic troubleshooting guide:
http://s807.photobucket.com/home/budm/allalbums

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://en.wikipedia.org/wiki/Capacitor_plague
Parts: try www.shopjimmy.com or Ebay
3helpful
1answer

My toshiba 57h93 worked fine this morning power went out

Ur DM power board is dead,must be replaced.Try this
website for the board.Tv repair World.com.
0helpful
1answer

I have a JVC LT-42X579 TV. I got home tonight and

This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.
0helpful
1answer

Pioneer 53

Unplug the TV for maybe 10 minutes, then turn it on. Sometimes these units simply need to recycle. If that doesn't work, you've likely got serious problems.
2helpful
2answers

NO PICTURE OR SOUND

Hi
Usually, if the red light is flashing and you get no picture, that means that the lamp life cycle is finished and you'll have to get a replacment lamp. the lamp has about 3000 hours of life (2 to 3 years under nomal use).

You can buy a replacment lamp from here
http://cgi.ebay.com/NEW-DLP-LAMP-BULB-JVC-FOR-HD-61G787-HD-61G887-HD-61Z456_W0QQitemZ320274762989QQcmdZViewItem?IMSfp=TL0807151554r7572

Hope this helps
Cheers
0helpful
1answer

Tv won't turn on

I had a similar problem when there was a power outage or the lights went briefly out. I unplugged the TV and left it for a few days/weeks and then plugged it in and the TV worked. I think newer TVs should be treated like a home computer and put them on surge protectors.
0helpful
1answer

Philips 37pf7320a/37 picture issues.

The problem is the small signal board that is the video processor.
Not finding what you are looking for?

475 views

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...