Question about Radio Shack (15-2147) Remote Control
Hello. I received a RadioShack Universal Remote control to use with a JVC TV. I would like to know step-by-step how to program the remote control so it will change the channels with the Cable TV plugged into it.
Programming a device: make sure batteries are installed correctly. Turn device on(for ex., your TV). Press TV button next to Power button on your 15-2147...Press and hold the little P button until the red LED lite blinks twice...enter the first four-digit code for your device(in your case,JVC TV...first set of #s is '0463' ) note: the LED will blink once as each number is entered. If the number is correct the LED will blink 2x. Note if the LED doesn't blink twice after entering the 4 digit code, begin again with the next set of numbers. For JVC the codes are 0463 and 0053. Once your remote blinks twice after entering in your TV code, press the power button. This should turn off your TV. Just use like any other remote. Hope this helps you.
Posted on Oct 12, 2008
I need the Sony tv code for my remote Radioshack control 15-2147.
Posted on Dec 14, 2008
I cannot get my menu button to go to channel programming all i get is sleep timer on my magnavox tv with my radio shack remote
Posted on Dec 12, 2008
I need the code for philplis tv please
Posted on Jan 12, 2010
Just press the tv icon and then press setup hold it till the llight blink twice then enter the tv code
Posted on Jan 12, 2009
What about an RCA tv??? anyone have the codes?
Posted on Nov 23, 2008
Tips for a great answer:
Jan 03, 2016 | JVC AV-32D305 32" TV
Jan 14, 2013 | Radio Shack 3 in 1 Universal Remote
Sep 17, 2012 | Universal Remote Control 10694 Remote...
Apr 11, 2012 | Sanyo Televison & Video
Aug 22, 2011 | Radio Shack 3 in 1 Universal Remote
Mar 12, 2011 | Universal Remote Control Remote Control
4,119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: