Need Simple User Guide for Humax 9200T

If you have changed your TV, you'll need to change the TV code in the Humax remote. See the TV code list at the back of the Humax User Guide.

First of all, thank you very much for choosing FIXYA today for your online technical support needs.


Here is a direct link to the ONLINE USER'S MANUAL for that model:


http://www.remote-controls-shop.co.uk/freeview/user-manual-pdf.aspx?brand=Humax&model=PVR9200T&display=file.pdf

To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted section of text just above.


This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.


You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed.


You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.


I truly hope that was helpful to you.


Good luck and take care.


Joe.

Here is an official link for you to download the complete user manual (107 pages) and here is an extra guide with frequntly asked questions (12 pages)

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Yes. Try this manual;

www.humaxfoxsathdr.co.uk/.../Humax-Foxsat-HDR-User-Manual.pdf

You will need to purchase a scart to HDMI converter - available in the UK for about £40.

If you Google 'Scart to HDMI converter' you should find several options, which will be cheaper if you are in the US!

Unfortunately the Humax box you have only supports Scart A/V I/O, which is of course now obsolete.

You will see the colored jacks on tv. There should be a print by them that says out. Match the colors from the jacks on the tv to the same colored ones on the Humax. The ones on the Humax should say input or a/v or dvd, or phono. From the dvd player, match the colors from here to the tv. The tv should have another set of 3 colored rca jacks that say imput on them.
From DVD Player out to tv in From tv out to Humax in/av/dvd/ ect.
Yellow is video Red is Audio Right Channel White is Audio Left Channel

Remove the Aerial.
Switch on or if it's frozen switch off at the mains and on again.
Press Menu
Installation and enter password - 0000
Select 'Default Setting' and OK
Select 'YES' and OK to restore all settings to factory default.
Confirm again to start loading, enter the password again and it will start scanning for channels but won't find any.
Replace the aerial and press OK to rescan and now it will find channels. On completion press SAVE then EXIT on your keypad.
You won't lose any saved programmes but you will have to re-schedule your recordings.

Not a complete solution but after much fruitless fiddling through the menu I eventually found that the programmes were actually there but under different channel numbers.
I searched a long way down the LIST of channels (on remote) The BBC1 channel I want is now 800 BBC. Selecting 1 on the remote still brings up BBC Wales.
This applies to my Humax 8000T PVR - I can't comment on other makes of Freeview box.

just had the same problem with the humax pvr-9200t
found VCR1794 & SAT1808 work most of the standard buttons.
the codes need to be downloaded from oneforall.

Hello Fixya Team,

I did solve the problem with the EPG not updating quick enough when you power on.
If once you power on you switch channels to BBC1 youwill find the EPG updates quite quickly.

Hope this helps out.

Lomp.