Picture is blurry and is shaped like a bow tie on my tv

The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board is dead.The tv convergence board reqiured changes it 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board problems to solved the tv picture convergence picture problems.The shop,will cost like $300-350 for parts and labors.

Is the convergence option still listed under the on screen menu setup options, or has it disappeared?

go to hatch screen adjust all colrs to make white color boxes , also adjusts linear lines

loose connection on convergence ic

if it is bowing from top and bottom your looking at a convergance problem if you keep using your tv soon there will be no picture at all when the board crashes... convergance board needs to be replaced... hope this helps..

bad convergence ic's
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

This is a convergence problem.. possible deflection problem... you might need a tech to look at it...

I have the same problem, it is called the "bow tie" effect, I read in a forum a couple of years back it is because they started computer sodering instead via humans and it was not successful during that time. I bought mine in 02. I was hoping to find a picture of the the board and the specific soder joint on this forum. I hate to pay alot for a tech, (specially since it was mitsibitsi's poor craftmanship) and a 65" is not something you throw in the truck and take to them. Good Luck.

this indications that you have a problem with convergence. first try to go into customer menu...setup....convergence. and see if the convergence will adjust.. if it wont then you have a problem with the convergence cuircit boards.

This indicates a convergence problem..convergence power supply probally.. however ive seen 2 other cuicits cause this ..