Stuck VHS tape in Samsung TV/VCR Combo

Must take VCR out to remove tape gently.Cause of problem is usually a dirty mode switch.

Only easy way is to unplug tv / vcr from AC outlet and plug it again, now try to eject.

Try a VHS Cleaning Tape Cassette. Follow it's instructions. If no better result it's not worth throwing away money on having repairs done but better put toward, if you can afford to, buying:
Option 1. A VHS/DVD player (combo as these are known) and plug that into the Emerson AV input.
Option Two: A VHS/DVD twin recorder combo deck - and plug that in.
Then start on copying any VHS tapes you cherish to DVD on this device.
Option Three: Forget the Emerson except for just using as a TV and buy a new TV with DVD player built in - the latest type of combo.
(I'm having to guess whether you've just used tapes to watch or record and watch)

U have play back problems on playback SP LP SLP modes tuggles problems.Try website like Remotes.com to buy the tv original remote,have these buttons to set the correct VHS tape play back modes tuggles problems.

The VCR is not turning the TV power off. The tape is not playing. I'd guess maybe it needs a cleaning or a replacment.

Hey Ol' Fred...
One of my good friends is an ol Fred so I felt compelled to stop in and help!
I'm not sure of your setup, but if you've got a combo DVD/VHS unit, make sure that you have out puts to the TV for Both parts separately... You can designate by accessing the TV's onscreen menu and setting up a separate source for DVD and one for VHS. I've found on my projection TV that it's best to use the Coax cable connections for the VHS to TV.
Then once it's setup with separate hookups to the Tv, you should have audio and video for VHS...
k

sounds like there is a tape in it you are not aware of ,it may have one (vhs tape) stuck in it.
larry

take the battery out of the phone for 2min and then put it back in and turn it on

No can,t do that tv will not work at all if do so.can you put a tape in the tv some time the tv will stay on . if so you have a drity mode switch under the vcr deck. itry to clean.

Unplug the TVCR, take the cover off, find the motor (probably on the right side of the mechanism) and turn its shaft with your fingers until you have run the tape back out. Now plug it back in and try it again with a scarificial tape. If it continues to fail, replace all the rubber belts in the mechanism.
Hope ya fix it!