Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

Anonymous Posted on Oct 08, 2008

Red horizontal convergence PT-47WX49E

I have a PT-47WX49E and I've got a slight red horizontal convergence issue (slight red shadow to the left, some bowing of the red in the upper left of the screen as well). I tried fixing it through the on-screen convergence menus, but it won't budge after a certain point. Any suggestions? I'm not terribly technical, but if there's something relatively simple I can do to make the picture look good again, I would! I appreciate the time!!

  • Anonymous Oct 10, 2008

    Okay, so what exactly do I do to adjust the converge outputs or limiting resistors?

    This is my first time doing anything like this, so any information would be great. Thanks particleaudi!


×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 185 Answers
  • Posted on Oct 08, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Oct 08, 2008
Answers
185
Questions
0
Helped
30189
Points
263

Converge outputs getting tired or limiting resistors opening up. adjusting this incorrectly will make the situation worse keep in mind that overdriving these chips will cause a fold over of your image when you see this carefully adjust in the opisite direction as you may be overheating the outputs

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The Panasonic mod# pt-47wx49e has started to have a blue and a yellow shadow on the right side of the screen. the rest of the screen is normal. The operating instructions give you diddle to on. Do you have...

Ur tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignments,have colors shadows or 3D colors pictures.The tv convergencce board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.
0helpful
1answer

Panasonic PT-47WX49E blue convergence problem.

if convergence does not adjust in menu mode could be a defective convergenceic or fuse
0helpful
1answer

Pt-47wx49e convergence problem

I just replaced the 2 convergance chips, but it did not seem to fix the problem. I then tested all the resistors that feed the convergence chips anf there was a 2.2 ohm fusable blown. IT was R7050 on mine. That seemed to fix it so that I could adjust all the colors through the convergence 2 screen. There seems to be a slight bow near the bottom when you look at the c2 screen, but not noticable when you are watching a picture. Since I got this broken, I am not sure how perfect it should be.

If anyone can send me the service manual, I would appretiate it. Thanks.
0helpful
3answers

Service manual for PT-47WX49E

i need the service manual as well, if possible (i'm just having a red horizontal convergence issue).

also, any advice on what to do would be swell!

my email is v6vywa002 [at] sneakemail [dot] com

thanks!!
0helpful
1answer

Green rainbow streak on bottom of TV PT-47Wx49E

If Convergence on setup dosen't work, And you think its not STK Convergence chips!, Then "Yes" It more then likely will have a few open Resistors!... (Near STK chips)
0helpful
1answer

Double vision

Replace both the convergence ICs STK392-110 You can get new Convergence ICs at this link and they provide free installation instructions with pictures so you can do the repair yourself. heres the link.
http://servicemanuals.vstore.ca/
0helpful
1answer

Panasoic PT-47WX49E

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
0helpful
1answer

Panasonic Projection TV PT-47WX49E convergence ...

may not be convergence may be a bad stk for convergence if that style if so try stk
0helpful
2answers

PT-47WX49E - Convergence issue, need a service manual

HI Mike you will have to purchase that schematic at samsphotofact.com or repairworld.com they cost about $40.00.US.good luck.
3helpful
47answers

PT-47WX49E Service Manuals

scott iam in need of one too would you PLEASE add me to your list Thanks so much
Not finding what you are looking for?

117 views

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...