My stereo has xm radio but does not give me that option when i press srs it only gives me radio and to play cd

RESET YOUR PLAYER AT DEFAULT SETTINGS. SWITCH IT OFF. SWITCH IT ON AND INSERT CD. GIVE THE PLAYER TIME TO READ. DON'T PRESS ANY BUTTONS TILL IT COMPLETE IT'S READING. IT WILL PLAY THE CD.

ALSO CHECK CD'S ARE BRANDED AND NOT COPY FROM COMPUTER. FEW COMPUTER WRITE CD NOT HAVE AUTO PLAY OPTION.

IF PROBLEM NOT SOLVE PLEASE INTIMATE.

No it is satellite ready, meaning you need to add atuner to the stereo, but you can use the stereo to control the tuner. Again, a seperate tuner will need to be bought and installed. Good Luck.

First, is the radio even ipod capable. If it is, there should be an additional cable that plugs directly to the ipod or iphone. Usually when you attempt to use Sirius/XM, a phone number pops up on your radio for you to call. You will probably need the part number, which will be on the back of the radio. If you are not into all that trouble, you can purchase a new one that has all the functions you want and you will have all instructions and information available. Hope this helps.

It's not receiving enough power from the boombox so the voltage drops too low for the receiver to function properly. Check the cradle connector for bent or pressed pins and the power source of the box for proper functioning: measure the voltage it delivers and the status of its components, especially the filtering capacitors.

Could be a broken wire in the cable or ungrounded

You can't download Xm programming, like you can from itunes, where you get a song in 3 or 4 seconds.  
Do you mean record music? You must record realtime, either while listening or while the unit is idle in its cradle.
It's easy. while listening to the radio in the cradle (press mode repeatedly to get to Live XM mode), then press the center (play/pause) button.  the menu will pop-up, select Record.  It will give you the option for Song, Channel, and Session.  Just chose one of the first two and press the button.  You should see a microphone appear at the top of the screen.  It's recording.  Follow the same steps to stop the recording.  Setting up a recording session is self-explanatory once you get into that screen.

hold down the sound button until the settings pop up. then keep scrolling until you find clock stg. After you find this, click the play/pause button on the top left of the stereo and the hours will blink. then press it again and the minutes will. you change the number by scrolling with the volume button

According to the users manual which is here if you need it;

http://inform3.kenwoodusa.com/manuals%5CKDCMP2032.pdf

Press and hold the CONTROL KNOB for 1 second, "DISP SEL" is displayed.

The press the CONTROL KNOB left or right to change the Display options.




Best of Luck.

I had a short in my TERK antenna and it gave me the same problem.

If you know someone else using xm, you can try their antenna to see if that is.

I took mine to Best Buy and they had one they checked it with.





Best of Luck.

Check fuses. If BOTH of those are OK then you may have a fried radio. Sorry.