Reset boton Where is the reset button located?

It is SIM 20-1 for maintenance counter reset.
Press
[Clear] key -> Exposure mode selector key -> [Clear] key -> Exposure mode selector key
to enter to maintenance mode.
Add with UP arrow 20, press Start button, add with UP arrow 1 and press Start button. 000 will flash, exit with pressing Clear key 3 times.
It will only reset the counter, I recomend also replacing the parts (drum, develop, blade,..) and clean it.

Hello John, I am sending you the link, so you can download the user manual of your Westinghouse LD2657 DF
There on page 11, you will find the location of the Menu button on the TV and on page 13, you will find the location of the Menu button on the remote control
I hope you can solve your doubt
Greetings Franco Dosil

Hola John, te estoy enviando el link, para que puedas descargar el manual de usuario de tu Westinghouse LD2657 DF
Ahi en la pagina 11, encontraras la ubicacion del boton de Menu en el Televisor y en la pagina 13, encontraras la ubicacion del boton de Menu en el control remoto
Espero que puedas resolver tu duda
Saludos Franco Dosil
https://data2.manualslib.com/pdf/20/1902/190200-westinghouse/ld2655vx.pdf?c3e7e2acefed1d2a800a646a0696b258&take=binary

if its got no fuel pressure its either no power or bad pump

the brand and model number?

yea i now a great reset code
torn of the phone and take out the memory card just in case to don't format.
step 2:hold the grean boton,and tape 3,and * all 3 togheder and pres on to the phone pt don't let this 3 boton's enliss wen apear wich town you'r living and then you can release the boton's and that's all great reset and fresh new 6680 phone fabrication reset.TNK's and i hope is helpfful for you all with nokia 6680.yahoo id:soni_djjoe2000 ad me and i help

Try holding down one of the botons for a few seconds mabey the menu buton

Esta camara no tiene boton de reset. El reset se puede hacer desde el menu, o simplemente quitando las baterias y volvendola a poner.

Aqui los manuales en Ingles:

FinePix Z2 Quick start

FinePix Z2 Manual

Disconnect the printer's outlet
Hold the Botton of power while connecting to the outlet
Holding down the power button pressed twice the reset button (red circle with a triangle)
Release the power button
The printer takes about 10 seconds into the show vaor numeroco zero.
Pressing + to the value moves from 0 to 1.
When this value to 1, press the button that is on par with reset, this will light up two lamps
One is that of plain papaer and the other of photo paper, at this point is put paper into the printer
Pressing the power button once or twice (it does not matter), the printer will print a proof sheet
When you print this sheet the value in the display returns to zero, leaving it well
Open scan cover (to remove the cartridges but was not removed), with the lid open faith disconnect the power to printer
Remove the cartridge, close the lid and turn on the printer.
Re-positioned and Refill cartridges in the printer and READY.

possible faulty VGA Controller board.

Hold down the menu button for 5 seconds (with the monitor turned on). It should reset the lock option.