Hp6180 all in one has an error 30

How to Fix Printer Not Activated Error Code 30

Set the default printer you use

Modify default setting of the printer and use the one you're using to replace "Print in PDF" to correct printer not-enabled error code 30 in Windows 10. Follow the steps -

Step 1 - Click on Win+I and then go to the Settings application and select devices.
Step 2 - Select from left pane printer & scanner and ensure that in the related right pane the option "Manage my default printer with Windows" is unchecked. Otherwise, it will not be tested.
Step 3 - Now you can find the printer and select default and click on it. Choose Manage choice when growing.
Step 4 - Control your device, page will be raising the printer displayed. Choose Default set.

Hopefully, after you start your work, you won't find Printer Not Activated Error Code 30.

Install Printer Software in Safe mode

In the case of Printer Not Activated Error Code 30 in Windows 10, the manufacturer has also created software. So uninstall and then reinstall the same thing. It could cause conflicts with other drivers of applications or devices running on the system if it doesn't work. A PC deactivates all of this elementary software in protected mode. Therefore, uninstall the printer's built-in software and reboot in safe mode. It is pretty easy -

Step 1 - Hold down the Shift key by pressing it constantly. Click the Start taskbar button, and then Power icon and choose Reboot.
Step 2 - Install the printer application that causes an error once the PC goes to secure mode. Start the print task and check if it has solved the problem. Once the performance is fulfilled, get out of the safe way and enjoy yourself.

Add PDF Printer of Microsoft

Although the necessary result is not available, the built-in Printer Windows 10 will solve this issue. Might not work properly and the system cannot detect Microsoft PDF Printer. To further confirm if it exists within the list, navigate to the Devices section. If Microsoft Print is not available in PDF, add it manually using the following steps. Note - Delete and add if available, then reinstall.

Step 1 - Navigate to Path - Settings => Computers => Printer & Scanner => Print in PDF => Delete => Yes.
Step 2 - Press Add Scanner. Choose the printer I wish is not mentioned, which is just a few minutes later under the Refresh button.
Step 3 - The printer dialogue is added on the computer, and the last choice is tested - add a local printer or a manual network printer. Select second. "Next".
Step 4 - Click the drop down on the 'Use an existing port' button, pick LPT1 and hit the Next' button.
Step 6 - Install the printer driver section, you will see 2 boxes. Furthermore, pick Microsoft to scroll down in the first column of Maker. Both Microsoft-related printers will be loaded instantaneously in the second column. Skip on the other side of the screen and choose Microsoft Print to PDF.
Step 7 - Check the round cell in the following window just before using the currently installed driver (recommended) and then click "Next."
Step 8 - Remember to PDF the name Microsoft Print, then select the Next button.
Step 9 - By pressing Print a test page you can verify that your Printer performs adequately. Now, make sure the Set box is checked as the default printer and press End.

View original or some extra information: - Hp Printer Not Activated Error Code 30

Thanks for sharing
http://ciaopakistan.com/services/

Haven't had time yet to fix it......will check that out...thx again!!!

Here is a list of all HP service error codes. Hope it helps :)