Phone rings when ringer is off - Aastra Telecom Aastra 9417CW Two-Line Telephone with Call Waiting Caller ID

I went into the menu and turned off the personal ringer. And that worked for me. When you set up a caller into the phone book it ask you for a personal ring tone. If none is selected none will ring.

Here some solutions for your problem + a link to the user manual.

**Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
To select the ringer:
1) With the phone in standby, press [vol/ / ] or [vol/ / ].
2) The phone will sound the different ring tones at different volumes. To turn the ringer
off, select RINGER OFF.
3) When the phone sounds the ring tone and volume you wish to use, press [end].


**Temporarily Mute Ringer
If the handset is off the base while an incoming call is ringing, simply press [end] to mute
the incoming ring. The ringer will sound with the next incoming call.
Note: You can only mute the handset ringer if the handset is off the base when the phone starts
ringing.
Adjusting the Earpiece.

**Here is also a link to the phone manual http://www.uniden.com/pdf/EXI4561om.pdf

Hi, what makes it when disconnected to ear piece. When ear piece is not in my ear, you can not hear the phone ring is because the ringer of the phone that makes you know when there is an incoming call on your cell phone or a message alert tone on your cell phone is damaged and does not work and makes sound to notify you .

The ringer is a tiny speaker inside the cell phone that allows you to hear incoming call from your cell phone You will need to replace the ringer inside the cell phone ....

When you replace with another ringer (speaker inside the cell phone),phone will be Ok again.

Would advice that you contact an expert in phone repairs for asistance,that will do you good to prevent more damaged on the phone...

Take care.....

My Dear Please First check the Phone settings in the Ringing Setting IF Your Phone Ringing settings all Ok But Phone in the not Ringing So
Your Phone Ringer Default So Please change Ringer and Ringing Problem will Solved

First You Go to Phone setting in Sound & Ringing Setting and check the Phone Ringing Setting if Ringing Setting alrdy OK
But No Ringing So
Secnd Option:
Your phone Ringer Default SO Please change Ringer
and Ringing Sound Problem will Solved

The box underneath the setup in the manual (mine's on page 13) describes what TOLL does. It can answer on the 3rd ring, the 5th ring, or if you have messages it will answer on the 3rd ring and not until the 5th ring if you don't.

You can hang up after 3 rings if the machine doesn't answer, because you have no messages. Other manufacturers call it TOLL SAVER.

Carl

Base unit ringer tone
(use either the handset or the base unit)
Make sure the base unit is not being used.
Setting the base unit ringer tone by using the
4 Select the desired ringer tone by pressing [d]
or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring
• You can also select the ringer tone by pressing [1]
to [7].
5 Press Save, then press [OFF].
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns
• After pressing VOLUME [<] or [>], the base unit will ring using the current ringer
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [d] or [B], then press
Select.
3 Scroll to “Set base unit” by pressing [d] or [B], then press Select.
4 Press Select at “Ringer tone”.
5 Select the desired ringer tone by pressing [d] or [B].
• The base unit will ring and the ringer tone will change. If the base unit ringer
volume has been turned off, the base unit will not ring
• You can also select the ringer tone by pressing [1] to [7].
6 Press Save, then press [OFF].

This Can Be Found On Page 17 And 18 Of The User Guide.

If You Do Not Have The User Guide It Can Be Downloaded Here
http://support.radioshack.com/support_phones/doc73/73355.pdf

Thank You For Choosing Fixya.com

While the phone is not in use, press the up arrow until you get the ringer volume you want.

To assign a ring alert (ringer ID) to an entry:

Phonebook > entry, then press
Options > Edit Contact > Ringer ID > ringer name

Note: The Ringer ID option isn’t available for
entries stored on the SIM card.

To activate ringer IDs:
Settings > Ring Styles > style Detail
> Ringer IDs > On