Question about Sony DVP-NC85H Multi-disc DVD Player

Open Question

Sony dvp-nc85h will not display HDMI

My Sony DVP-NC85H stopped displaying in HDMI. Tried other TV's, cables etc. It has worked for a few years...

Posted by Jayzson on

  • Jayzson Jan 02, 2012

    This unit is connected directly to HDMI input on my HD TV. The progressive scan does work with the HDMI input, in which it always has. In other words, it has been connected the same way for 2 years and worked fine, all of a sudden it stopped displaying in HDMI. (This delivers the best picture option.)

×

Ad

2 Related Answers

blakerwilson

Blake Wilson

  • 1 Answer

SOURCE: SONY DVP- NC85H

I am getting this error too and I believe it means that somehow the tray that the discs ride on is jammed. I think if you unscrew the three screws on the back and the two on the sides you can pop the top off and see the tray. I bet there is a disc somewhere that didn't fall back into its right spot and it will give you that error... I just opened mine up and sure enough there was a DVD that was in the way... I removed that disc and the error went away. I hope that helps you out as well.

Posted on Oct 02, 2008

Ad
alexander404

alexander woolfolk

  • 276 Answers

SOURCE: Has anyone ever solved the

Look on the bottom of the unit. There is a hole with the letters ex and op. Shine a light in the hole and you will see a white plastic object with a slot for a slot screwdriver. You can turn this either way but be careful. If you feel resistance and the object does not turn, turn the other direction and the unit will open. Op is open. Ex is exchange.

Another less elegant way is to open the unit's case, take off top cover and get your discs being held inside the unit that way. Be careful.

Of course you could take the unit in for service but may not be worth the cost.

Posted on Mar 13, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program my sony dvd player dvp.sr200p to work on my philips tv


No special programming is required. Connect the DVD player to the TV using an HDMI cable. Note which input jack you used on the TV (example: HDMI 1 or HDMI 2, etc.) Turn on the DVD player and insert a DVD disc and play it. Turn on the TV and select the input you used to connect the DVD player (example: HDMI 1 or HDMI 2, etc.). You should now see and hear the DVD disc playing. Most settings are pre-set at the factory so everything will work without adjustment. However, both the DVD player and the TV have a Menu where you can adjust settings for picture, sound, etc. if desired.

Jan 01, 2016 | Sony DVP-SR200P DVD/CD Player

1 Answer

Can't connect Panasonic Viera TV to PC with HDMI


Check your owners manual. Some TV's will not except PC resolutions.

Mar 20, 2013 | Televison & Video

1 Answer

What format of video file can the DVP-NC85H read?


AVI maybe ok. Is there anything error with your converting? I ofen use kigo video converter free to convert video. It's a free ware but works well for me.

Mar 11, 2013 | Sony DVP-NC85H Multi-disc DVD Player

1 Answer

Hookup diagram


easy.connect the dvd trough optical cable to the amplifier home theatre for surround sound and the video where it says DVD input and the sony cassete deck where it says cd in A/V the red cable wwhite and yellow,

Jan 20, 2010 | Onkyo HT-S790 System

1 Answer

I can't turn off the Progressive Scan feature on my Sony DVP-NC85H. I tried pressing 3, 6, and 9 while the unit was off but had no success. Apparently I can't use the HDMI connection unless the Progressive...


When your player is connected thru HDMI cable it should automatically detect what your TV's display is capable of. I am assuming that you have the DVD player connected to a HD television. There should be a progressive scan button on the front of the player. But I don't think the button will work when it is connected to HDMI. How do you have the player connected? Is it directly to the TV or does it go thru a switch or a reciever then to the TV? If it is connected this way then that can be the problem. There is a signal that needs to make it to the TV and these devices can block the signal. So verify that it is connected directly to the TV and that the HDMI cable is working. If that is ok then connect another connection to the TV along with the HDMI cable also hooked up. Then change your TV's input selection to that connection. You should be able to get to the dvd menu and set the HDMI output from auto to a format that your TV will accept. Then go back to the HDMI input and see if you have a picture. Let me know if that helps.

Sep 28, 2009 | Televison & Video

1 Answer

Hdmi output


There is a firmware update available from sony that appears to address this problem. Go to sony and do a search for the model number dvp-cx995v. I have not tried it myslft but the write seems to address your problem.

May 04, 2008 | Sony DVP-CX995V Multi-disc DVD Player

2 Answers

Not able to turn off Progressive scan feature-sony dvp nc85h


If it works like my sony RDR-GX315 just press the pause button on the player itself and hold for 5 seconds.

Jan 08, 2008 | Sony DVP-NC85H Multi-disc DVD Player

1 Answer

HDMI cable


not a problem as long you have HDMI jacks on both machine

Nov 30, 2007 | Sony DVP-NC85H Multi-disc DVD Player

Not finding what you are looking for?
Sony DVP-NC85H Multi-disc DVD Player Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

229 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...