The slide in the sd card is missing? - Samsung Cameras

SD and Mini SD memory cards has a small slide switch on the edge of the card, which write protects data on the memory card or add photos to the SD card. Slide the switch from the LOCK position to the UNLOCK position, which is furthest away from the contacts.

If your camera uses a SD memory card then -
SD and Mini SD memory cards SD and Mini SD memory cards has a small slide switch on the edge of the card, which write protects data on the memory card or add photos to the SD card. Slide the switch from the LOCK position to the UNLOCK position, which is furthest away from the contacts.

SD and Mini SD memory cards SD and Mini SD memory cards has a small slide switch on the edge of the card, which write protects data on the memory card or add photos to the SD card. Slide the switch from the LOCK position to the UNLOCK position, which is furthest away from the contacts.

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

A search for that model on Brookstone's website takes me to the iConvert Instant Slide and Negative Scanner. That scanner does not require an installation CD. It works by scanning slides or negatives and then saving them to an SD card. Many digital cameras use SD cards so you may have one already. Otherwise an SD card will need to be purchased separately.

Try the card in a different camera, and try a different card in your camera, to try to isolate the problem.

Locking of an SD card is by the little plastic slide which operates a switch in the camera itself. The slide must be present in the "unlock" position, to operate the switch, to allow writing to the card; therefore if the slide is missing, the camera considers the card locked.

Most SD cards have a small slide switch on the edge the SD card. The slide switch has two positions, read only (protect) and write.
Most the slide switch to the write position.

Your digital camera has an internal termination problem.Some of the terminals either not touching the data terminals of your SD card.The contacts are like brushes that when you slide in your memory card they brush in contact with the card,if either one or two brushes misses its contact problems arises.It needs someone who works with digital cameras to correct this problem because it requires opening and disassembling descreet parts.

SD and SDHC cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

Remove your SD memory card and slide the little white notch on the side in the opposite direction to unlock. You cant miss it.