DVD-RP56 DVD Player Problem:

Onkyo DV-CP706B 6-Disc DVD Player (Black) - Amazon.com

www.amazon.com/Onkyo...Player-Black/.../B001AMS...

Amazon.com, Inc.Color: BlackChange .... It's quieter than it was before, and it plays ALL DVDs, even if you can see some visible damage ..... THere was no color-just black & white.

Onkyo dvd player no color only black white Questions ...

www.fixya.com > Forum > Tags > dvd player no color only black white

Onkyo dvd player no color only black white related problems. Ask your Onkyo dvd player no color only black white questions. Get free help, advice & support ...

Onkyo dvd player plays black white Questions & Answer

yellow battery
red accessory
black ground
purple right rear + speaker
purple/black right rear -
green left rear +
green/black left rear -
white fr left +
white/black fr left -
grey fr right +
grey/black fr right -
blue auto antenna
blue/white rem amp
brown phone mute
orange/white illumination
grass green handbrake but if u want to play dvd's
whilst u drive connect this to earth

pls rate people arnt rating hope this helps

Yes there is video format for our TV and dvd players. NTSC & PAL...

NTSC SYSTEM SELECTED IN TV & DVD PLAYER PLAY PERFECT NTSC CDS & DVDS, BUT IF PAL CD OR DVD IS INSERTED SUCH PROBLEM COMES.
EVEN IF, THE DVD PLAYER SETTING IS KEPT AS PAL, AND WE INSERTING THE CORRECT CD OR DVD AND ALSO IT SHOW BLACK & WHITE PICTURE, ETC.... so please check your video system in TV, DVD PLAYER and check the CD or DVD you are inserting is of same video format you have set in DVD player.

Pls see region setting or change colur system of ur DVD player to one which is desired by ur TV if in USA it should be NTSC , mention ur country pls

Here's the link to download the manual.
http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Home-Players/model.DVD-RP56.H

Hi,

Initially, pls check if your portable DVD has an NTSC/PAL selector switch, option or feature. If yes, try selecting the other. Should this not be corrective, pls post the exact brand, model and your general location/region.

Hope that this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

It appears that it has something to do with Progressive Scan been turned on. Progressive Scan is a feature built in your dvd player, wich by using it, it would give you a better picture//resolution on your tv, you need to use Component or HDMI cables to hook up the dvd to your tv if you want this settings, but if you are using composite RCA cables (Red,White & Yellow) and the Progressive funtion is turned on by accident, it may give you a split screen, black & white, or no picture problems. Also if you are using Component (Blue, Green & Red) cables, if one of them is unplug, the picture can be out of colors, or no picture. Check this things, if not, write back with more details about your set up.

I read about removing the cover and spinning the motor by hand. It was suggested without power. I found that I had to have the unit powered up when I hand-spun the motor, then everything worked perfectly... we'll see for how long.

Look at the back of the DVD player it should have a NTSC & PAL switch ,but remember to switch off the dvd player after you change it over to NTSC or PAL

i hope this will help you

craig:)

this may be the problem with your dvd player