SOURCE: I need the codes to program the ONE ALL URC-2060 universal remote
Don't know the codesbut you can scan for it by doing the following:
If your remote has a 'Scan' button, do the following:
1. Press the VCR button
2. point the remote at the VCR and press the 'Scan' button.
This will get the remote to go through all of the codes it knows for VCRs at about 3 second intervals. Once you see the VCR state change, hit any key on the remote and it will be programmed for the proper code.
694 views
Usually answered in minutes!
×