Menu box on screen won't come off

Use the remote to go to menu, then find video settings and then set it ti automatic. Also make certain you haven't set the cable box video setting to strech mode.
Good Luck Ed Pinero

I would try to plug in your usb cord to the camera and computer and then disconnect it after.. that should reset it.

1. Open the Properties / Preferences window for the printer.
   
   

   For Windows 7
   

   • Click 'Start' from the bottom left of the Windows screen, and 'Devices and Printers .'
   • Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.
   
   For Windows Vista
   • Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.
   • Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.
     

   For Windows XP Home Edition
   

   • Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel,' 'Printers and Other Hardware,' and 'Printers and Faxes.'
   • Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.

   
   For Windows XP Professional Edition
   

   • Click 'Start' from the bottom left of the Windows screen, and 'Printers and Faxes.'
   • Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.

   
   For Windows 2000/ Me/98 (if applicable)
   

   • Click / Select 'Start' from the bottom left of the Windows screen, and 'Settings,' then 'Printers.'
   • Click your right mouse button on the listing for your printer, and then select 'Properties' from the menu that appears.
     
     
2. Click on the Main tab.
   
   
3. Select 'Plain Paper' as the Media Type. If any other paper type is selected, color ink will be used to create black.
   
   
   
   Note: The pigment black ink will only be used when printing on plain paper.
   
   
4. De-Select the box for 'Grayscale Printing'.
   
   
   
   Note: If either 'Borderless Printing' or 'Duplex Printing' are enabled from the Page Setup tab, grayscale will be created using a combination of the color (dye) inks to prevent smearing.
   
   
5. Click 'OK' to save the changes.

The printer will now only use the pigment black ink tank.

you damaged the gold contacts. Now you have to buy a new cartridge.

I have answered this fault earlier , please check this out

Is the issue with both the button on the remote and with the one on the set?

Unplug the monitor power cable and plug it in back after 5 seconds. This should remove the "menu box". But I suggest you to call technician to fix the hardware problem with your monitor buttons.

Go to BROTHER.COM click on support, poke around there and you will find a manual.

DickyO

Can you set the brightness? If you set it I'm sure the main menu screen comes up after that.