My tv model is sony KDL-52VL150 . problem is when i try to turn on after few second it gose standby itsalf's, and also i did unplug from power outlet & put it back & wait, but same thing, which part's is gone?

Hi Mizanur,

First of all, thank you for posting your question here at Fixya.

Your TV has a built in self diagnostic software that can help us diagnose accurately where the fault came from once the unit gone to malfunction. To activate it, press the following buttons on the remote control within a second on each other in standby mode( red LED is on), "Display", "5", "Volume (+)", "Power". Initial screen will be displays as follows :




To display the self diagnostic list, press on the remote control.

The screen will display the list ofmy tv model is sony KDL-52VL150 . problem is - 12_14_2011_11_36_32_pm.jpg>



Numerical value "0" means that there's no error detected, "1" means that an error was detected.

Please let me know what error code(s) with numerical value "1" to continue our diagnosis.

Kind Regards,

Jdvillanueva