Question about Toymax Magnavox 37MF231D 37 in. LCD TV

1 Answer

TV is slow to start up. Green light blinks for a long time.

Green light blinks and goes off requiring manual pushing of on/off button until green light continues to blink. After 20 minutes green light goes bright, then out. Need to hit remote "on" quickly. Go through this cycle about 4 times and TV remains on. This problem seems to be common with this TV.

Posted by Richard Gardner on

Ad

1 Answer

Guddu sharma

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

Take it to mechanic,because it not repair by a common man at home..

Posted on Jan 04, 2018

Ad

2 Related Answers

Anonymous

  • 1 Answer

SOURCE: Magnavox 32mf231d - Just a blinking green light, No Power

Our 37" Magnavox was having the same issues posted here. Blinking light. My husband and I FIXED it for only $5 and an hour of our time. People stop complaining and give it a try. What do you have to loose? It was a very easy fix.You will need to remove the old capacitor, solder the two wires on the new one in then put it all back together. That is it. If you feel unsure about where to put parts back, take pictures for review. I used the same 2200 @ 35v capacitor like the person that posted the pics. Very helpful by the way.

Posted on Jan 11, 2010

Ad
maatmartin7

matt martin

  • 1258 Answers

SOURCE: We have a maxnavox 37 in flat screen HDTV. When

You have a bad capacitor. It will be a 25volt,2200MF, 105 degrees...and it will be bulged! Results will be a AMAZING! Thanks for asking!

Posted on Mar 04, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Sony trinitron kv-es29m80 tv has no led light

The blinks are fault indication. If the standby light blinks 10 times and the set shuts down after that;
Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board
2helpful
1answer

Green light is blinking --says clean when you push

Hello & Welcome to FixYa

Flashing green light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin

0helpful
1answer

Our WS-55313 Mitsubishi Projection screen tv was on then just died. When we push power button or remote on, the green power light comes on for a couple of seconds then the tv goes off .

do the self check this model has.


When green light goes off press and hold both the input and menu buttons for five seconds and release both buttons.

The power light will blink a two digit error code like, two blinks, two blinks, a pause and then repeat it several times.

let me know what the error code you find is and I will let you know what it means.


SD TECH
0helpful
1answer

Turn on tv...green lamp blinks several times.lights up but no picture...press any remote button timer in green blinks...tv turns off and goes to standby

The tv "LAMP"LED light indication flashes or stay lit?The tv projection lamp been in this tv like 1/2 or 2 years?Tv been on and used like 4 or 5 hours a day?Yes,than the tv projection lamp life are over.Require a new tv projection lamp.
1helpful
2answers

Mitsubishi WS-55909 dm board repair

I have the same TV and the error light code on my set is 22
0helpful
3answers

TV won't turn on even though it starts green, then goes off

Although my tv still does the "turn green and turn off" thing, I simply unplugged and repluggd the tv. After I did that, I pushed the "ON" button on the tv itself, unplugging and replugging the tv until it finally came on. I think the "instant warm-up" switch is going out.
4helpful
4answers

I cannot unlock the commands ; the red light ( paddock ) is on

Push the HeatDry and High Temperature buttons at the same time
Then:
punch these buttons back and forth until lights light up (about 5 times) then:
Hit cancel
0helpful
1answer

Blinking Green light

There is a small hole on the front of the tv with a push button in it. Use a toothpick and push in the button until the green light goes out and this should reset your tv......Joe
Not finding what you are looking for?
Toymax Magnavox 37MF231D 37 in. LCD TV Logo

Related Topics:

100 views

Ask a Question

Usually answered in minutes!

Top Toymax Televison & Video Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76708 Answers

Tom Chichester

Level 3 Expert

61988 Answers

Are you a Toymax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...