Instruction manual When I purchased my machine I received a photo copy of stitches. I need a manual. How do I get one?

Perhaps a manual would be helpful:

File JUKI DDL 8300N Instruction Manual pdf

You should probably contact the manufacturer with questions. Hopefully, you did some thorough research before purchasing this machine. From the info I found, it appears to be a straight stitch only machine. I don't know anything about this machine, but I would be hesitant to purchase a straight stitch machine for sewing swimwear. Usually, swimwear needs a stretch stitch or zig-zag capability. Just my thoughts...

Amazon com Juki DDL 8700 Industrial Straight Stitch Sewing Machine Arts...

Juki DDL 8300N Industrial Single Needle Lockstitch Sewing Machine with...

JUKI DDL 8300N Straight Stitch Industrial Sewing Machine With Table Lamp...

...

you can purchase manual this at sewingpartsonline.com

Instruction Manual Elna 7000 Computer

the 7000 was the last of computerised the models produced by Tavaro Switzerland, had some very nice features and big range of stitches. Circa 1987-88 I think.

Both the instruction manual and a workbook are available at the Singer Sewing Machine site, and you can download them free. They both will be able to tell you how to select your patterns.

I just took a look at the user's manual, and pattern selection is on page 42.

try these sites
bernina customer service
sewingpartsonline.com
sewusa.com

You may download a copy of the manual at http://www.singerco.com/uploads/download/1272_6268-_-6268_6267-wholeas-of-6_23_05-special.pdf

ebay might have what you are looking for. This is the first place I'd look for parts the stopped production. Reading material will always be in ebay than the manufacturer itself. Also try this one I found http://sewingwishlist.com/help/pfaff-1469-info.html

You can purchase that instruction manual here:
http://www.sewingpartsdirect.com/white-model-622-instruction-manual.aspx

http://userguides.50webs.com/

Contact Allyn International INC. which are the distributors in the US. Model 4795 and 4595 are the same but one is the instructional type I think, that's what the person I talked to told me. I got a free video and booklet from them. Fortunately my machine came with the manual, but it was not enough for the hemmer foot and I also needed some help with the overcasting stitches. This booklet explain all the stitches, the foot you need to use and the proper width and length of the stitch.