Question about Compaq ProLiant ML370 G4 (374490421) Server

1 Answer

Compaq ProLiant ML370 G4 (374490421) Server - Windows xp issues

I have Compaq ProLiant ML370, currently it has windows 2003server i want to install windoe XP profession it give an error Hard Disc Drive not found. please assist

Posted by Zuberi Marijani on

Ad

1 Answer

Lisa

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 101 Answers

Servers need the Drivers for the Drive array card.
The server should have come with a smartStart CD that has the drivers for it.
You are NOT going to get another OS on this machine unless you load the drivers for the adapter.
... and why put XP on a Server? that's not the optimal OS for the hardware.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/lisa_52daba487e5b4d53

Posted on Feb 20, 2013

Ad

1 Related Answer

LHeruska

Lou H

  • 94 Answers

SOURCE: NIC Drivers for Very Old Compaq ProLiant 5500 (win server 2003)?

That server should have a Intel NC3221 NIC in it. You can try this driver

http://www.driverfiles.net/Network-Adapters/Compaq/page,level2,27,9,resultpage1.html

Posted on Feb 01, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Increase processing speeds ProLiant ML370


Only the obvious like CPU, RAM and network. You can check your specs against these possible configurations.

http://h18004.www1.hp.com/products/quickspecs/11450_na/11450_na.html


To be honest, don't see 64 Bit support so it may not make a difference, because of 32 Bit OS limitations.

Dec 11, 2012 | HP Compaq ProLiant ML370 G3 Server

1 Answer

Hiii.....windows server 2003 installed in my hp proliant ml370 g3server.the server is thermaly overheated and restart itself.firmwares are updated & os is formatted n re installed.all cooling fans r...


Hello,

You may need to reapply thermal grease to the cpu/heatsink combo. Over time, the grease will disapate and needs to be reapplied. Also, if your memory cards are very hot, you can add heatsinks to those to assist with cooling. And lastly, you may check to make sure that your power supply is the correct wattage for your system. A low 350W power supply trying to push a 780W system will create a strain on all component parts.

Good Luck
C2Solutions

Nov 03, 2011 | HP Compaq ProLiant ML370 G3 Server

1 Answer

It's posible to install windows 2003 server on hp 2210b


Change SATA Native mode in BIOS & use W2K3 Ent Edn with Sp1

Sep 12, 2011 | HP Compaq ProLiant ML370 G3 Server

1 Answer

Compaq Proliant ml370 g2 does not boot, beeping every 30 seconds, no video output. Internal Health LED is RED, Harddisk Health LEDs all green Component Health LEDs all green (RAM Banks are...


hdd fault caused by surge video card failure ram failure hdd failure depends what the beep codes are they are coded the length and duration tells you what the fault is ie three short beeps or two long ones try bleeping computer.com or check out bleep codes
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/Proliant-ML370-G2-server-strange-beeping/td-p/3221528#.VJgYMsgDQ

Apr 28, 2011 | HP Compaq ProLiant ML370 G2 Server

2 Answers

Can the HP ML370 G3 be upgraded to windows server 2008


Unfortunately hp does not have drivers for ML370 G3 on windows 2008 this OS cannot be installed in this server, i attached the os matrix so that you can confirm.

OS Matrix

ML370 G3 OS

Oct 27, 2010 | HP Compaq ProLiant ML370 G3 Server

1 Answer

Hi guies the windows srever 2003 files in my hp ml370 is corrupt and i tried to fix the prblem by format one hard disk partition in my scasi disks array and installing win srv 2003 on it but whe i log on...


HP SmartStart CD x32
The utility to use to set up the ML370 g3 server is the SSCD (smart start cd) this is a guided installation cd that will help you set up the array, install drivers and diagnostic utilities and after that
will request the windows cd so that you can finish the installation.
instructions:
1. download SSCD from here
2. extract the zip file
3. burn the ISO image to a cd
4. boot the server to the cd
5. choose from the main menu the option "Deploy server"
6. follow the wizard

Oct 26, 2010 | HP Compaq ProLiant ML370 G3 Server

1 Answer

I have a HP Proliant ML370 G3 server which was replaced can it be rebuilt for 64Bit Windows 2008 operation?


generation 3 servers do not support windows server 2008 there are no drivers for this OS
i include the OS Matrix for you to confirm

Oct 04, 2010 | HP Compaq ProLiant ML370 G3 Server

1 Answer

I have HP proliant Ml110 g5 server and i want to install Windows Xp insteadoff Windows server 2003. i have a driver which is compatable with windows Server but not windows xp. so what can i do for that.


visit my site
www.sureshayyar.110mb.com
for all installation issues of XP....detailed instructions can be found to install XP there...browse all pages there....
which driver are u looking for and which one you have for what hardware ?

Mar 27, 2010 | HP Compaq ProLiant ML110 G4 Server

Not finding what you are looking for?
Compaq ProLiant ML370 G4 (374490421) Server Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...