- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Some cell phones don't mute, but a *6 will mute your phone to the conference call center, and #6 will unmute if you wish to say something. This will not mute your phone, so when you hang up...you're always good to go to make calls. It only mutes a phone (any phone) to the server conducting the conference.
WHEN you are in conference ..
go to options(that is press left soft key)..dont worry the call will be continued..
then,it displays a list of options,press down until you see mute,click mute and the calls will be muted...
There is a couple of way to do this. If you are trying to call forward the lines to a outside extension you will have to press Intercom #6011 9 (your phone number you want it to go to) then redial. Your second option is to get call forwarding through your telephone provider. Usually this is a low cost addition and is the way I would forward calls externally. Hope this helps.
sounds as if you will need your vendor to program your phone and others that need be to have Handsfree/mute capabilities.. i assume since you can not mute then you can not place your phone on Handsfree either.
The button for handsfree is the same button for Mute.
So when you are on the handsfree call, press the handsfree button again and the call is muted on your side.
To talk again, press the handsfree button to un-mute the call, then press it again to mute your call.
sounds strange, it lookslike a main board problem, considering that u have been using similar unit before.there is not much that u can do from the menu options.u will have to refer ur vendor for rpairs
sounds like an ipt phone, did you program the phone? 3,6,9, hold all pressed at the same time will get you in program mode. hit 2 then make sure you have all you settings in there correctly
×