Blurred color notice it in peoples faces redish green color

update your tv softwhere

If the colors are not matching and shapes have a red, green or blue halos, then the problem is convergence rather than the color wheel. The problem is usually fixed replacing the two convergence ICs in the alignment circuit. The replacement involves de-soldering of two old ICs and soldering new ones in places. More components in convergence board (resistors, fuses etc.) may need to be tested and replaced. The repair ad the soldering job require training and experience and must be done by a technician.

Regards.

Ginko.

If your TV looks 3D, warped, or distorted it likely has a convergenge problem.
If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.
You can search google for parts or you can get the parts with repair instructions from sites such as www.TvRepairKits.com

i dont know

You need to call technician,maybe your CRT for Green color is not functioning well.

BAD CCD will be repaired free of Charge call canon in ur region they will send a postage paid envelope and repair it !!

Pls rate me FIXYA if i deserve it here

see this

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=8288&keycode=2112&id=29819

about 400.00 to repair

Move picture Mode Dial to Auto settings (Green color mark) and try again.

While it is true JVC tubes rarely fail, they can give trouble.
Another possible solution is bad screen / focus block......
Remove lower front grill panel and access board...Check for
smooth adjustment of RGB screen and focus.....let me know....T..

The doe problem go away if you bang on the side of the camera? there is a known issue with the CCD sensor on certin model cameras that after a few years the glue or somthing dries up inside the sensor and it developes a bad connection. Canon has admit they know about this problem and they will fix them free of charge and pay shipping both ways. Sometimes users can bang on the side of the camera and the camera will work properly again but not for very long. I cant see your display so im not sure if thats it or not but the problem has this purple blackish symptom. Go to the canon usa webpage and then search around for your camera model and if there is a known issue it will say on their site. Then there are ways to contact them on their site.