When i click anything it shows 'check operator services

try reinstalling operating system from back up cd. If that do not resolve the problem, contact a good pc hardware engineer or chiplevel service engineer. They can solve the issue. Hope it helps

Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example 603 ) (do not put the e with the number) & click search
if it doesn't show anything contact singer customer service
or try these site for a manual
sewingpartsonline.com
sewusa.com

Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example w915 ) & click search
if search doesn't come up with anything contact singer customer service

Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example w2037 ) & click search
if search doens't show anything contact singer customer service

Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example 5500 ) & click search
if search doesn't come up with anything contact singer customer service

Follow the following steps to uninstall client services:

• Click to Start button.
• Click on run.
• Type control.This will open 'control panel'.
• Click at my network connections.
• Right click to Local Area Connections and select 'Properties'.
• `Highlight local area connection for netware by clicking it once.
• Click on the uninstall in the same dialogue window.Follow the instructions.
• After uninstall action is completed then click ok in the same dialogue box.

If you have further query then tell me one more time. Thenks for using FixYa.

Just make sure service "printer spooler" is running. To open windows Vista service under 'Run' type 'services.msc', then have a look that service is running or not. You can just simply right click to start it.

Hello and Welcome to FixYa!
Try This;

• Click Start, click Run, type MSIEXEC /UNREGISTER, and then click OK. You won't see anything when you run this command.
• Click Start, click Run, type MSIEXEC /REGSERVER, and then click OK. You won't see anything when you run this command. On some machines you may briefly see an hourglass. After this, the operation is complete.
• Try installing the application again.

I Hope this will solve your issue.
In Case, do tell me.
Concerned, Nooh: Team FixYa!

Hello,

Try this:

1. Click the Start button

2. Click on 'Control Panel'

3. Click 'Administrative Tools'

4. Click 'Services'

5. Scroll down to 'Routing and Remote Services'

6. Right click on 'Routing and Remote Services'

7. Set 'Startup Type' to 'Disabled

8. Make sure that the service status is Stopped. If it is not Stopped, click the Stop button

9. Open a 'Command Prompt'

10. Enter: 'netsh interface ip delete arpcache' and hit Enter

Hi,
To resolve this problem, obtain the latest service pack for Windows Vista. Follow these steps:

1. Click Start , click All Programs, and then click Windows Update.
2. In the navigation pane, click Check for updates.
3. After Windows Update has finished checking for updates, click View available updates.
4. Click to select the check boxes for the updates that you want to install, and then click Install.

This should solve your problem. If not contact me without hesitation!