Samsung VP-D80 Mini DV Digital Camcorder Logo

Related Topics:

A
Anonymous Posted on Dec 07, 2011

Lines and no sound

After recording play back as black lines through the screen and no sound even when turned up to full volume?

3 Related Answers

Anonymous

  • 73 Answers
  • Posted on Feb 23, 2008

SOURCE: In Camera (Record) mode, does not show video at all, black screen

THIS IS YOUR CCD.. SAMSUNG IS VERY AWARE OF THIS BUT STILL CHARGES A ARM AND A LEG

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 14, 2009

SOURCE: Screen isfull of colored lines. Record and play

I looked into to this it is the ccd and Canon will fix it for free (shipping included), as stated below. I have copied what has helped me!
It has recently come to our attention that the vendor-supplied CCD image sensor used in this Canon digital camera may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments.
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, products exhibiting the above-mentioned malfunction if the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.
U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to [email protected]

Anonymous

  • 11 Answers
  • Posted on Feb 16, 2010

SOURCE: Black screen

image sensor gone bad... buy a new one...

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Please help! Behringer KX1200 master volume stops past 4 and no lines work just fx return

Also how do I reconnect the fan?
It sounds like you may have a broken potentiometer (aka volume knob) for the master volume control. If that is the case, you would need to replace it with a new one (or take it to an electronics technician to diagnose and repair).
Regarding the fan disconnection, this likely isn't causing your issue but you would still want to reconnect it as it keeps your amplifier cool while in use. Reconnecting is fairly straightforward - all fans have 2 or 3 wires that connect to corresponding terminals on the amp. Just make sure you don't mix up which wire is positive and negative, and make sure they are connected firmly and securely.
0helpful
1answer

Cant hear volume too low

this could be a codec problem or video was record on low sound settings .try checking that your sound is up full right click on sound icon....open volume mixer make sure all slides are up full.
hope this helps
0helpful
1answer

When I hook up my computer to the receiver and play music it is hard to find a point on the master volume where the music plays clearly. The music skips and i have to be very careful with the master...

Master volume control pot is dirty and needs to be cleaned out. You can do this by unplugging the receiver and turning the master volume control back and forth from zero volume to full blast a couple of hundred times to clean the surfaces and restore normal operation.
5helpful
1answer

Black screen

image sensor gone bad... buy a new one...
0helpful
1answer

We are having trouble witholumne play back wheen tv is up full blast and

check cables get new ones. and check the DVD volume is up
0helpful
1answer

My acoustic guitar sounds choppy when played back.

Try Using A Condenser Mic Or Making Sure That Your Phantom Power Is Turned Off When Using A Regular Mic.\www.Myspace.com/CrossRoadsToNowhere2007
0helpful
1answer

Rotel RA01 amp - volume control

Make sure you connected your record player in the right inputs. Better try it to a line level auxilliary input that is sure to pass the volume control. hope this helps..
0helpful
1answer

Volume up then pic gone

Good Day;

The TV's front panel may be bad, manual buttons. TEMPT FIX; remove speaker, cloth covered, cover, disconnect cables. TV will work but only with remote.

Good Luck!

Not finding what you are looking for?

34 views

Ask a Question

Usually answered in minutes!

Top Samsung Video Cameras Experts

302lab

Level 1 Expert

9 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Samsung Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...