I need to find a replacement part for my Haier. The kit part # is TV3940-01.

my tv just went to a blue screen one day. I can turn it on and then it will just remain on the blue screen. Any button (except the volume) I push on the remote comes up on the screen "no signal". What would you suggest? I have been reading about replacing a fuse or board? Most of those are on the 42 inch version---I have teh 37 inch version.

Heard lots of problem with similar case for this tv,you need to buy upgrade kit from the haier itself, there also available at Sears you will get instruction sheet will contain all information all you need is screw driver to replace the parts Control Board TV-5210-39, Y-SUS TV-5210-35, Z-SUSj TV-5210-37, New EPROM Chip 2006 version TV-2455-03, Upgrade Label TV-4050-08 and Haier Service Bulletin SB-TV-0003 containing the instructions to replace the boards yourself.


Good luck..

If this is the 42EP24S TV the repair is quite easy - remove the back cover and replace 3 boards and an EEPROM, replace the cover and then program the set via the remote control.

If you can get the repair kit (TV-3940-01) from SEARS, get it.

You can get a kit (6871VSNB03E) from Rich-Tech for $198 plus shipping. It does not have the EEPROM though.

I would say you dont need to repalce Servcie kit.kit is only for 42EP24S units.
examine your unit What is the problem?Is the blue indicator on?If indicator on you will have audio.
In this case I would check first Y-sus board or Z-sus board.

Good luck
Dals123

If your TV is the 42EP24S model, get the TV-3940-01 repair kit if you can. If you cannot get that kit, get the 6871VSNB03E kit. Rich-Tech has it for $198. Unfortunately Rich-Tech's kit does not include the EEPROM so how long the repair will last is unknown.

Harish.......If you've lost both audio and video you'll probably need the upgrade kit. If it were just video you could get by for sometime with replacing the slow blow fuse on the s-zus board. Check your eprom chip on the digiatal board to see if it appears burnt. If so it may have fried. If you'd like the service manual I'll need your email address

i have same problem with my plasma, haier was absolutly no help. could you email me tech manual and instructions for upgrade kit. thanks

This model has several defective boards and eprom chip. There is an upgrade kit. I'll attach the kit part number and upgrade instructions. http://service.haieramerica.com/documents/SB-TV-0003.pdf

Burn it and sell it to the amish

Gastech, trash the TV...Trust me. It's not worth it. Sears fixed mine too, and it never worked. Sears and Haier are keenly aware that they have a rotten product, and are not willing to support it. Your best bet is to not dump anymore money into the TV and buy either a Vizio, Sony, Samsung, etc...It's worth it. Do yourself a favor and don't buy from Sears or Haier again...Tell your friends, too.