Jammed error light litted - HP LaserJet P2015n Printer

If the error indicator light is lit, then the Canon printer is jammed. To fix a paper jam you must remove the paper tray, disconnect the AC power adapter, wait 5 seconds, then plug the printer back in. If the jammed paper does not automatically eject, carefully remove the paper manually. To help prevent further jamming, fan the paper in the paper tray to prevent the paper sticking together.

Great people delivering a superior customer experience. Canon Printer offers a complete line of printers, scanners, all-in-one office machines and paper jammed problem. Facing the problem with Bother printer, Scanners, Call our technical expert and get quick help. Dial Canon Printer tech Support Phone Number (18777788969) and fix your problem. For more information visit us: http://printertechnicalhelp.com/Canon-printer-technicalhelp.html

replace the switch in the door,dash,or jam

The light means that the printer has a paper jam.

To resolve this, Press Continue twice quickly to see the secondary error code. Press Continue to resume printing once all the jammed pages are cleared from the paper path.

You may download the user manual from Lexmark Support site, or you may also click the link http://bit.ly/a8pwFZ to download the user manual.

For further assistance, please contact Lexmark Technical Support

Hi, the red light will generally stay lit for one of four conditions: if there is no paper in the trays, if the copier is out of toner, if there is a paper jam, or if there is an error code. The specific condition should be displayed on the operation panel. Do you see a message or error code?

that would be my guess, the water probably shorted out the switch in the jam, replace switch

Hi,
If paper jam light is solid or printer shows paper out light solid all the time,
Then try these suggeted steps:
Take the Tray 2 out and check if all the paper guides are moving freely if they are than remove the toner cartridge and check if any toner sensor is not align correctly.
If they are aligned correctly than next to the pickup roller there is a small piece of plastic make sure it should be hanging freely if it is than we need to perform cold reset of the printer.
Switch off the printer press and hold down the go button and switch the printer on keep holding down go button till the time three lights lit up on control panel, as soon as three lights lits up release the go button and let the printer initialise of it s own.
If that doesn't fix than Formatter Board of the printer is faulty.
Logic:
If there is no paper jam and printer rep[orts the jam means either any of the sensors is not aligned correctly and reporting the jam or formatter Board(Motherboard) of the printer is faulty and showing incorrect display.
Thanks and Regards

1. Remove the paper tray.
2. Disconnect the power cord, wait 5 seconds, then reconnect the power cord.
   NOTE: The printer will reset and eject the paper. If the paper does not eject, try to remove it manually.
3. Replace the paper tray.
4. Press the Print button on the printer to resume printing.

Hi,

U need to check if the printer is still having any paper inside. Check gears and rollers if there is any Jam. Try to uninstall and reinstall the printer. And try using calibration option included with the software.

Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

you might need to check your driver if it is install correctly for the correct OS, i'm not sure what OS you are using but below link might be helpful to help solve your issue
http://etech.maiila.com/?p=42

all the best..
p/s please rate me...