Stays on for a few seconds on and shuts off
Dyna-pro 120000 is spitting raw fuel out and will not ignite can anyone tell me why and how to fix?
SOURCE: dyna glo pro model #rmc kfa 125tdgp flashing code
I have same heater and problem-1) Check fuel inlet screens at bottom of hose in tank 2) Check air filters at fan module opposite end of the fan blade 3)Check for spark in ignition chamber 4) Check for fuel flow in ignition chamber (look at pressure gauge at opposite end from air exit) You'll have to remove the top cover to do these checks. The side covers will hang on each side ok. I hope these checks help you out.Good luck.
SOURCE: I need a new ignitor
Please call me at 866-883-9312. I have an ignitor in stock that will work for you. The price is $58.99 + $9.75 for shipping.
Thanks Bill
Hi,
Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...
Reddy Heater - Troubleshooting Torpedo Heaters
Torpedo Heater Pump Pressure Adjustment
heatman101
Hi,
Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...
Reddy Heater - Troubleshooting Torpedo Heaters
Torpedo Heater Pump Pressure Adjustment
heatman101
1,449 views
Usually answered in minutes!
×