Why does the screen read card error - Cameras

Memory full, if it is true, you should backup some pictures and delete them from the card.
Read error, can indicate a corrupted file, dirty contacts on the memory card or a camera malfunction.
for 1 backup all photos and format the card. 2. Clean the contacts on the card and in the camera.
3. Contact a FUJI dealer.
Everything is in the manual (still online) on page 112

First try reseating the memory card, then try formatting the card using the camera o/s if that doesn't work replace the memory card

Hi,

http://is.gd/B05L6B

According to the user manual for the device, on page 81, it reads:

If any of these errors occur, turn the the unit power OFF and restart it.
If these error message continue to appear, please contact a TASCAM Service Center.
***Device Error*** (the one you're asking about)
FileErr
FX Busy
FX Rx Failed
I
/F Error
Mount Error
SaveParam Fail
SD-Card Error!
SD Not Found
SD Read Busy
SD Write Busy

Looks like your unit may require servicing at an authorized Tascam service center.

Good Luck!!

Go into the menu and find "reset"...follow the on-screen instructions.

You probably need to format the card in the camera. This will erase all the pictures so download them first.

pls update ur firmware from here it would likely resolve problem

http://www.fujifilm.com/products/digital/download/s1000fd/fupd.html

get back to me if it doesnt and do rate me FIXYA for help

I own a samsungDigimax 301, 3.2 mpi camera. When I inserted an SD card in the slot, the screen read " card error". Could you guide me as to dealing with this problem so that I may use the camera to take pictures this weekend? Thanks. Mathew.

Issue When using a large-capacity memory card (usually 128 MB and higher), the printer appears to lock up or freeze, and the printer may display an error message. Solution Allow the printer to completely read the memory card when it is first inserted before performing any action on the printer. If the memory card reader LED is blinking green, that means that the card is being read by the printer. Wait for the LED to stop blinking.

Please read all of post first!
try reformating thd sd card BUT remember everything on the card will be lost. I'v had that happen when I moved my card to another piece of equipment and then back again.
IF there ARE pictures on the card then try another card reader to pull them off before formating the card.
some copyers, scanners, even some pc's have readers in them, or maybe a freind.
hope that helps :)

This error message indicates that the memory card in the camera is write-protected. To take a picture, turn off the camera and insert a new card, or change the storage location to internal memory.