Install Lexmark 9350 printer on laptop

Check the following steps:

1. Scan for the available wireless networks on laptop.
2. Check the network and select the desired wireless ssid which is for printer
3. If is it password protected than proviode the password.
4. Connect to the network.
5. Then print.


**If this works please rate else let me know in case of further help.**

have used the latest drivers from webite for yours and did u have older printe ron it before this thx nick

The drivers are sadly meant for XP. As of now, I don't think there are Vista drivers that can actually work.

I'm sorry!

Please let me know if this helps. Good luck!

Hi,
Here is a link to the downloads page of Lexmark. Download the driver for Windos Vista either 32 or 64 bits (depending on your system) and install it in Windows 7 and it should work without any problems.
http://bit.ly/bZuI8T

look in add/remove programs and delete previous versions of the program and the drivers and then go to a website called freeware files.com and download the drivers from there... then reinstall the drivers to your pc...

Sorry, I have no solution. Just the exact same problem. Must be a defect in the x9350. Hmmm maybe that is why they were discontinued.

You would need to download the Vista 64bit package of Lexmark Productivity. Install this version and you should be all set. Hope this helps.

If you are using a Vista machine. First,make sure you don't have two conflicting firewalls active in your firewall menu. If you have a built in firewall in your dsl or cable modem I suggest not using windows firewall. If you don't have two firewalls active and you are only using Windows firewall, you may have to allow the spool portions of your lexmark program through Windows firewall manually.Check your windows firewall and make sure all parts of the lexmark application are allowed.Also make sure you have installed the latest lexmark drivers on your notebook via lexmark update. I suggest anytime you are installing drivers that you install them using your administrator account. I also recommend unblocking the installation exe before you install. To do this when you download the update, right click on it click on properties click on "unblock" at the bottom then click ok.Right click again on the installation exe and click on administrator. This gives you administrator rights to run and install all portions of the exe file.

You can download the printer software from this link , so you can install the printer to your computer
http://downloads.lexmark.com/perl/downloads/downloads.cgi

I talked to DEll and they walked me thrugh it . Thanks, Diane