Computers & Internet Logo

Related Topics:

Question about Computers & Internet

2 Answers

WHY DO i GET AN ERROR MESSAGE WHEN TRYING TO CREATE RECOVERY DISC? ERROR CODE 0X9411

ON VERIFYING I GET THE ERROR CODE AND THE DISC EJECTS!!!

Posted by Anonymous on

  • 5 more comments 
  • Anonymous Nov 17, 2011

    Are you using a DVD+R or DVD-R? Also What software are you using to burn the recovery disk?

  • Anonymous Nov 17, 2011

    HI, DVD+RW

  • Anonymous Nov 17, 2011

    There's your issue. See my solution =)

  • Anonymous Nov 17, 2011

    AM USING SONY DVD-RW 120MIN 4.7GB

  • Anonymous Nov 17, 2011

    Please try a DVD-R. Rewriteables can be very problematic after writing to them multiple times.

  • Anonymous Nov 17, 2011

    THANK YOU, WILL GIVE IT A GO

  • Anonymous Nov 17, 2011

    np! sure it will fix your error

×

Ad

2 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 55 Answers

Please use DVD-R media and not DVD+R media. If still not working try the steps below.
1. Make sure you have the most up to date firmware for your burner.

2. Try burning at a lower speed
3. Try different media
4. Some CD burning software can actually cause burning errors so remove what you have and try something else, a good start is imgburn as it sometimes tells you what is interfering.
5. If all else fails try another burner or the burner in another PC to identify the cause (OS or hardware).

Posted on Nov 17, 2011

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

You can get a lot of help from www.bleepincomputers.com

Posted on Nov 17, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can't make discs for default back up error code: 0x9411 comes up after it burns the disk it won't varify

I HAD SAME PROB ON MY ASUS X5DC I FOUND DELETING GOOD FEW PROGRAMS BEFORE I STARTED THE BACK UP FREED UP MORE SPACE AND WAS ALL FINE ,HOPE OF SOME USE
1helpful
2answers

Tried to burn recovery discs and I get error codes

If the computer is still under warranty, get the faulty CD/DVD-writer replaced, so that you can "burn" disks.

However, you seem to have "other" hardware problems. Hire a qualified computer-geek (Geek Squad or Dial A Geek) to trouble-shoot, if your computer is out-of-warranty.
1helpful
2answers

Toshiba Recovery Disc Creator isn't working

hello lazerr_man,

Try to use another freeware burnprogram like burnatonce to create an
other CD, just to check if the Combo-drive is writing properly.

If you don't get any error messages like the ones from Toshiba program, then the problem is the toshiba software.

If other burn programs find difficulties in accessing CDs or DVD-Rs
then the drive itself giving you a hard time and might seek for replacement.

You may find the toshiba exchange parts too expensive and the internal drive is still reading disks properly, then think about an external dvd-rw drive, but make sure to buy a highspeed USB one (or even firewire, if the laptop has the port), else it will run rather slowly.

good luck
3helpful
1answer

I am coming up with error 10-fc12-0570 on the toshiba satellite a215-s7422 i used the both recovery disk and this was the error code

The error message is telling you that the recovery utility was not able to read the data from the disc correctly, or wasn't able to write it to the hard drive. The problem could be with the disc, the CD/DVD drive or the hard drive.

but usually error 10-FC12-0570 is pertaining to a bad HDD or memory


First, try copying the second disc using another system. If you can't copy it, order replacements from Toshiba Customer Assistance: 1-800-457-7777. If you can copy it, try using the copy to do the restore.
You can try using a third party disk checker to verify the problem is or is not with the hard drive. But since the system is under warranty, you're going to have to arrange to have it repaired anyhow, so it may not be worth the effort to verify whether it's the hard drive or CD/DVD drive. It's probably not the CD/DVD drive since you got all the way through the first disc. Contact a Premier (not regular) ASP for service from here: http://pcrepair.toshiba.com



The best way would be to load the Win Vista discs n format the pc...and reinstall...iam telling this because u have a tried the recovery disk as well....

I know most users will not have the Vista CD with you but the Vista Recovery Boot Cd is available free by Microsoft just google...

Download it burn the Image .iso and run that disc. Since that disc will not restore the OS all it does it lets u run diagnostics on ur HDD and allows u to install the OS. Once disk check is completed and repaired, proceed with the Recovery disks that you have.

thank you
have a nice day

0helpful
1answer

Error code when creating recovery disc

smash it, lol, i hate some computers, by the way im just kidding i have no clue what to do!
22helpful
7answers

Recovery error 320 on sony vaio laptop

Ketanvasu your an idiot....If he's trying to recover the laptop obviously the thing isn't working...so how the hell is he supposed to burn cd's genius?
1helpful
1answer

Recovery Disc not working

Is that recovery disc created in ur machine or not...
0helpful
3answers

Error 1317

If u have MS Office installation disc then insert it in Computer . Then open My Computer double on inserted disc ( disc you have inserted ) then installation dialog box will open . After that click on "Repair"
Wait till the installation is ended. Then restart the Computer.
Not finding what you are looking for?

133 views

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19165 Answers

Cindy Wells

Level 3 Expert

6555 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...