To set the time the instructions are on page 9 of the instruction manual in the getting started section.
in case you no longer have the manual....
1. press the tick/menu button twice. 2. press 0 and you hear 'to set the day and time press Star, to hear the day and time press Square. 3. press star. you hear 'please enter new day and time after the tone' enter the day (1=sun, 2=mon etc) enter the time using 24hr clock. 4. press the X/security button twice to exit.
Brilliant! Have been wanting to change the time and date since our last power cut , but could I find the manual? Thank you - you have saved my sanity... :)Brilliant! Have been wanting to change the time and date since our last power cut , but could I find the manual? Thank you - you have saved my sanity... :)
Thanks Davear. We get frequent power cuts and the date and time are never correct......until now!Thanks Davear. We get frequent power cuts and the date and time are never correct......until now!
Hi Hillary. The tick button is the menu button. Hence 'tick/menu button' stated in my original post. Hope this helps.Hi Hillary. The tick button is the menu button. Hence 'tick/menu button' stated in my original post. Hope this helps.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Still error ,handset registration fails although keep on trying step 1&2 in my kx-tg2360jxs panasonic cordless phone , what shall i do ? Shall i change handset batteries ? Really i got bored , is their any one facing my problem ? Help me please
If the handset displays 'Searching', 'Base' or 'Range out' on the screen, this indicates that the handset has lost its link with the base.
The following procedure should be followed to help resolve the problem:
Confirm that the power lead has not been inadvertently disconnected from the base.
Ensure that the handset batteries are correctly installed and are fully charged.
Ensure that the handset and base are within range of each other.
Switch the mains power off, wait five seconds and then turn it on again. This will reset your product.
Carry out a reset procedure on both the handset and the base to return the settings back to the factory default. Your user guide will guide you through the correct procedure.
If none of the above remedies solve your problem, please contact the helpdesk.
Hold down the forward skip button on the answer machine, it will say 3, if you have it set to 3 rings, just press the forward skip button again to the required number of rings, 10 being the max. Thats it job done.
×