Question about Tappan 30IN ELEC IGNa Oven

1 Answer

We have a Tappan electric oven. When we set the thermometer at 450 degrees, it goes up to 550 dgrees after 20 minutes. Eventually, it levels off at 535 degrees.

Posted by Ed Krinsky on

Ad

1 Answer

Dan Webster

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Tappan Master
  • 8,220 Answers

You don't give enough info for answer. Need model number.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Nov 03, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

General Electric oven how to reset thermostat


First of all, most oven thermometers move very slowly compared to the electronic sensors and controls on the oven. To make sure you are getting an accurate reading, the thermometer should be in the center of the oven, the oven should be preheated, then wait another 20 minutes after the preheat beep. If the temperature is less than 35 degrees higher or lower at this point, it can be adjusted via the controls. Usually on GE ovens you press and hold bake and broil at the same time until SF comes up in the display. Then press bake, then use the arrow keys to raise or lower the temperature setting. If the temperature is more than 35 degrees off, you may have a bad sensor, bad control board, or other problem.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jeffrey_634abadf963e31e5

Aug 08, 2014 | GE Profile JTP18 Electric Single Oven

1 Answer

How close should the temp control hold the temp


Generally the oven temperature will fluctuate as much as 30 degrees above or below the set temperature. The longer the oven is on, the less the temperature fluctuates. If you measure the highest and lowest temperatures readings with a thermometer after the oven has been preheated at least 20 minutes, you should come up with an average temperature somewhere within about 10 degrees of the set temperature. You can calibrate most ovens up to 35 degrees higher or lower if it is off. Any more than that requires replacing parts.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jeffrey_634abadf963e31e5

Apr 24, 2014 | GE Profile JTP18 Electric Single Oven

1 Answer

Oven temp heats higher than set


The control board is bad. One of the relays has fused and you will need to replace the control board.

Jan 07, 2012 | General Ovens

1 Answer

I tried to cook a frozen pizza in my Tappan electric range last night (which required it to be preheated to 400 degrees) and it would not preheat at all, even after about a 3 hour wait. I just turned up...


http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5153992&diagram_id=1251523#d1251523
your looking for part number 67 on that part breakdown
it is the bake element and if you inspect it im sure you will find it cooked or broken
befor you actually order the part take the unit out
unplug it
and inspect your wire connections to both sides of the element

Oct 17, 2009 | Tappan 30IN ELEC IGNa Oven

1 Answer

Hi. I have a ge convection oven(JCTP17) that has been working great until recently. I bought a Taylor oven thermometer model number (503) To check othe oven temps to see how accurate the oven is. I do a...


The Taylor oven thermometer you bought is decent at best. It is most likely the sensor inside the oven. Has your clock displayed any fault codes? F, followed by a number? Changing the sensor will probably correct the problem.

Aug 19, 2009 | Ovens

1 Answer

Oven temp set to 375, reads 375; after 10 minutes internal thermometer shot up to over 550 degrees


You need a new t-stat on this unit/ YOu can call us with the brand and model number and we can get the proper parts for you. Hope this helps you out! Thanks, Ella!~ :>)

Aug 17, 2009 | Ovens

1 Answer

Oven heat erratic


no there is not and your unit only has one temp sensor you will have to spring for a new control

Jan 07, 2009 | Ovens

1 Answer

Maytag oven needs temp calibration


Take your temp knob off and look in the center of the stem and you should find a small set screw. Using a small precision screwdriver, turn the screw until you see the light come on. (You won't have to turn it far.) Turn it a little at a time, maybe a 1/16 of a turn. Leave your thermometer in the oven with the door closed and at or near the temp probe that is in the oven. This way, you are getting a true reading.

Dec 30, 2008 | Maytag CWE4800A Electric Single Oven

1 Answer

Temp indicator chimes although temp is really 100 degrees low.


Yes you do need a new thermostat, just make sure that the sensor is not obstructed by anything. first.
Plz rate my solution
Thanks.

Dec 18, 2008 | Jenn-Air WW30430P Stainless Steel Electric...

1 Answer

Temperature in oven is way off


Jim,
A couple of questions... What makes you think the oven is off that far? If you have a set on the shelf dial type thermometer, throw it away. They are never accurate and generally read 50+ degree too low. I recommend the "biscuit test". Which is simply a cheap can of "hit on the edge of a counter top to open" biscuits and see how they bake with the instructions on the can. Make sure you allow the oven to preheat for 20-30 minutes (always but especially for this test).
To change the oven setting press BAKE, then run the temp up to 550 then immediately press and hold the bake pad for 10-20 seconds. The display should read 0 (zero) you can then use the up down arrow pads to adjust, hit bake pad again and then "clear" when done to lock it in but, you can only go up or down 35 degrees. If it is truly off by more than that you would need to change the main oven control board and oven sensor.

Dec 18, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

Not finding what you are looking for?
Tappan 30IN ELEC IGNa Oven Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tappan Ovens Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35742 Answers

Are you a Tappan Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...