Question about Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Tv will not come on. Red light blinking on bottom left front. Red light blinks 7 times

Posted by Walter Fike on

Ad

1 Answer

Norm

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT [email protected]

Posted on Nov 13, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture. TV blinks 8 times


I have come across 6 blinks; 7 blink and even 10 blinks.
the video below may throw some light. Not sure if the blink codes are universal across models. Panasonic plasma tv 7 red blinks of *****

Apr 02, 2016 | Panasonic Viera TC-P65S1 65 in. HDTV...

1 Answer

There is no picture or anything on the screen and the little red light in front blinks 6/7 times and nothing


These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Dec 09, 2013 | Sony KV-27S42 27" TV

3 Answers

My panasonic hdtv th-42pz80u has a red power light that blinks on and off and the tv will not turn on. how do i fix this?


How many times is that light blinking? For example a 7 blink error code would blink 7 times pause 7 times etc. What is your's blinking?

Dec 10, 2009 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

Philips 42PF9630A 42 in. Plasma 42 in. Plasma


Ok 7 red blinking led, remove the back cover of the TV. Looking at the power supply in the upper left of power supply. If everything is working fine you will see a solid green led if there is an error, you will see this light blinking also. Right below this led on the power board you will see a list of numbers 1-13 this will give u the problems that this led flashing problems are. More and likely u will have a problem with VSET or VSCAN. Which is connected to the Y-Main and Y-buffers,( the board that is too the left of the power supply if u look on the small print on this board you will see that it reads. 42HDV4 Ymain and the 2 small boards connected to it are Y buffers. To be sure that this board is bad if the TV keeps going into error protection. unplug the power supply and wait for the led to stop flashing. Disconnect the cable that plugs into Y-Main from the Power Supply. It should stay running. If u remove this board and look underneath u should be able to see where this board is getting hot. Easiest fix is to order a replacement. Y-main assembly.

May 05, 2008 | Televison & Video

3 Answers

7 red blinks


Is the light blinking 7 times on front of TV ? If u take the back cover of the TV off you should see two leds on the bottom right of power supply turn on when u push the power button. When the TV go into error protection on the upper left of power supply you should see. A blinking green light. Please inform me of the error it flashes and ill will be able to help further. ( Serveral possiblilties it could be from audio, bad power,and faulty Y-main.)

Apr 28, 2008 | Philips 42PF9630A 42 in. Plasma Television

3 Answers

Philips 42PF7320A blinks 3 times every time i hit the power button


The SSB is small self contained board that u connect your Antenna, and HDMI to. An error three is a communication error between the SSB and to Logic board ( located underneath the SSB on the back fo the plasma panel that is just below the power supply. U can check parts.com and see if u want to purchase a SSB for this TV. Is the 3blinking lights coming from the front of the TV. Also check the power supply and see how many times the green led blinks on the upper left of the power supply and let me know.

Apr 24, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

4 Answers

Lost all Power to TV


My TV did the same thing today. My red light blinks 6 times. Any help would be much appreciated!

Jan 05, 2008 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

Color variation and blinking red light on bottom of tv


The light flashing 5 times is normal at turn on as the set is monitoring current drain on the pictures tube cathodes. Any speakers near the set that have un-shielded magnets could possibly cause color issues.

Apr 16, 2007 | Sony FD Trinitron WEGA KV-36FS120 36" TV

Not finding what you are looking for?
Philips 42PF7320A 42 in. Plasma HDTV Logo

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76432 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...