Error on window range

What type of plot? Try turning off the stat plot features.

I do not know of any TI calculator with Model number 53, but I will try to give a general answer. If you get a window range error that means that the Window limits are not set correctly. For example, the lower limit in X, Xmin must be algebraically smaller that the upper limit, Xmax. The default for the TI graphing calculators are Xmin=-10, and Xmax=10. Similarly the Ymin must be smaller than Ymax. The default limits for the y-variable are Ymin=-10, and Ymax=10. If your calculator has a Zoom function ( if it is a graphing calculator, it must have it) then Press Zoom key and select Zoom Standard or ZoomStd.

You need to press the "window" button located at the top of the calculator, then change the Xmin,Xmax,Ymin, and Ymax to values that your graph will fit in.

There is no such error message from the TI 83PLUS. Did you mean WINDOW RANGE?
The easiest way to correct the messed up window dimensions is to reset them. You can press the Zoom button and select 6:ZStandard

There is no one good window range for all graphs, since graphs can have different areas of interest.

Press the ZOOM key, then select ZStandard. This will restore the window settings to the default range, which will at least allow the graph to be displayed. You can then change the window range and/or zoom as desired.

If this doesn't do it, please reply to this post, giving the function(s) you're trying to graph and your current window settings.

Press ZOOM 6 to reset the window range to their defaults. If that doesn't do it, please reply to this post specifying the exact function you're trying to graph and your window settings.

There's something wrong with your window limits, for example Xmax < Xmin or Ymax < Ymin. Press WINDOW to bring up the window editor and examine the values, making sure there are no inconsistencies.

If you don't see anything wrong, post a comment here listing all of the entries in the window editor.

Press ZOOM and select Zoom standard (ZoomStd).
Alternatively, press the WINDOW key to access the window range setup
Set Xmin=-10
Xmax=10
Ymin=-10
Ymax=10
These are the standard dimensions of the window.
You can change the dimensions as long as Xmin is less then Xmax, and Ymin is less than Ymax. Do not make Xres close to Xmax-Xmin.

Try zoom 6

or press ZOOM, option 6 (ZStandard).  That instantly resets the window range.